2B2200 Air Ride Suspension Air Springs Double Convoluted 1/4NPT Air Inlet Truck Springs Helper Bags

2B2200 Air Ride Suspension Double Convoluted 1/4NPT Air Inlet Truck Springs Helper Bags

Specifications and Detailed Technical Parameters:2B2200

Note

Conditions of use of rubber air spring
During use, the rubber air spring should be kept dry, cool and ventilated as much as possible, avoid exposure to the sun, prohibit contact with acids, alkalis, oils and other organic lubricants, and keep away from heat sources.

Rubber Air Spring Replacement or Replacement
When replacing the air spring, it should be replaced according to its model specification. If the air spring of the same model specification cannot be obtained, the air spring with the same performance should be selected for replacement.


Guomat air spring
1. Made of high quality.
2. 100% quality assurance test, faster response, lower cost, easier to install.
3. Many models for your choice. Before ordering, please make sure the Air Ride fits your vehicle. It is important to compare air spring dimension.
4. This airbag will give you the performance you crave. Greater lift, softer and smoother ride, bringing you a brand new experience


Common faults of rubber air spring capsule

(1) The surface of the rubber airbag is worn.
The gap between the air spring and the surrounding parts is not enough, and it will be worn by friction with other parts of the air suspension during work. Material friction produces wear.
The rubber air bag will have holes when the wear is serious. If the shock absorber is damaged, the air pipeline or the brake system pipeline is loose, etc., causing friction with the rubber airbag, the surface of the rubber airbag will also be worn.

(2) Chemically corroded holes appear on the surface of the rubber airbag.
When the rubber airbag is stuck with grease, lubricating oil or gasoline, etc., if it is not cleaned in time, the grease, etc. will erode the surface of the rubber airbag, and chemical erosion holes will appear.

(3) The rubber airbag is fatigued and aged, and cracks appear.
The rubber airbag is prematurely aged due to oil, etc., or it may be normal aging.

(4) The rubber airbag is deflated and unable to bear the load.
The air control line leaks or is blocked; the height control valve fails; the air pressure in the air tank is too low to open the pressure protection switch.


The photo of 2B2200 air spring/air shocks/ air actuator/ air spring assembly

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd.

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.