F-100-3 Punch Lift Cushion Yokohama Air Spring 3 Convolutions S-100-3R S100-3

3 Convolutions F-100-3 Punch Lift Cushion Replaces Rubber Yokohama Air Spring S-100-3R/S100-3

OEM Cross reference

AIRSUSTECH Part No.: F-100-3

YOKOHAMA S-100-3R

YOKOHAMA S 100 3R

YOKOHAMA S-100-3

YOKOHAMA S 100 3

YOKOHAMA S100-3

YOKOHAMA S 100 3

YOKOHAMA S100-3R

Replaces these air springs

Specifications and Detailed Technical Parameters: F-100-3

Design Height: 152mm

Max. Height: 222mm

Min Height: 87mm

Maximum stroke(mm): ±45

Max diameter(mm) :160

Standard Height,Internal Pressure 0.49 M pa When The General Value

Effective Area (Cm2): 79

Volume(L): 1.4

Load (KN):3.9

Dynamic Spring Parameters (N/mm): 78

Natural Frequency (Hz): 2.2

Max inner preesure limited (Mpa): 0.88

Burst inner pressure (Mpa): 2.9-3.9

Other types of yokohama air suspension spring S-100 series we could offer

What should we pay attention to when using th punch lift cushion

Equipment such as punch presses are very common. They are equipment for producing some molds or some parts. It is precisely because the utilization rate of this equipment is very high, so the service life of the equipment should also be concerned, and an important factor affecting the life of the punch press The component is the air spring. A good punch air bag can greatly improve the service life of punch equipment.

Therefore, when we use the punch air spring, we must first pay attention to its buffering effect. It must meet the application regulations of the punch, and there should be no air leakage. It can be used for a longer time to ensure that it can provide a good punch to the punch. Protective effects. The second is to pay attention to whether it can be replaced in time. If the air spring reaches the service life, it should be replaced in time to avoid the deformation of the punch press or the failure of the function of the punch press if the air spring can no longer function.

The related picture of F-100-3

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd.

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.