90W Poe Switch Gigabit Ethernet Switch L2 Managed Af/at/bt Network Switch DC48V Input

90W Poe Switch Gigabit Ethernet Switch L2 Managed af/at/bt

Network Switch DC48V Input

Key Features of 2.5G managed Industrial Network Switch

▪8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-FX SFP Fiber

▪2 Copper/MSA Fiber Combo ports ( Port 9, 10, and FX1, FX2)

▪Supports negative RS-232 console port

▪Cable diagnostic, Measuring cable normal or broken point distance

▪Redundant input power 48VDC (48~57VDC) or 100-240VAC

Management Interface

▪STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling

▪Supports Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power consumption

▪DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82

▪QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ

▪IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, GVRP, MVR

▪Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation

▪IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2

▪Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2

▪Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgrade failure

▪Supports IEEE1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port

▪RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab LLDP

▪Supports IPv6 Telnet server /ICMP v6

▪CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management

Application

Packing List:

FAQ:

1.What is the power input?
A: For non-PoE managed switches, it receives DC12V~57V, for PoE managed switches, it receives DC48V~57V.
All the models support redundant input.

2.Does your switch support 155Mb/s tranceivers?
A: Yes, the optical speed is 100M/1000M/2500M. Please just configure 100M speed in the management interface, megabit modules are working.

3.Can you supply a customized PVC label with my model on it?
A: Yes, there is description, model name and logo on the front PVC mask, all is available for customization.

4.What is the packing list?
A: There is a device, protective foam, a user manual, a warranty card and a console cable in the box.
But SFP modules and power supply are NOT included, please purchase it from us separately.

5.What is the PoE output voltage?
A: Its DC48V for 802.3af/802.3at/802.3bt compliant powered devices such as PoE cameras or PoE routers.
If the PD takes 24V power, then please use a PoE splitter to connect our switch and powered device.