8 Port 2.5G Industrial Poe Switch , 90w Network POE++ Managed Switch

Industrial poe switch 8 port 2.5G

90w network switch POE++ managed switch

Key Features of managed poe switch

▪8x 10/100/1000Base-T RJ-45 and 2x 100/1000/2500Base-FX SFP Fiber

▪2 Copper/MSA Fiber Combo ports ( Port 9, 10, and FX1, FX2)

▪Supports negative RS-232 console port

▪Cable diagnostic, Measuring cable normal or broken point distance

▪Redundant input power 48VDC (48~57VDC) or 100-240VAC

▪STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switching (ERPS) for redundant cabling

▪Supports Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet) management to optimize the power consumption

▪DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82

▪QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ

▪IEEE802.1q VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, GVRP, MVR

▪Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation

▪IGMP snooping V1/V2/V3, IGMP Filtering/ Throttling, IGMP query, IGMP proxy reporting, MLD snooping V1/V2

▪Security : Port based and MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2

▪Software upgrade via TFTP and HTTP, redundant firmware to avoid in case of upgrade failure

▪Supports IEEE1588 PTP V2 for precise time synchronization to operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave mode by each port

▪RMON, MIB II, Port mirroring, Event syslog, DNS, NTP, IEEE802.1ab LLDP

▪Supports IPv6 Telnet server /ICMP v6

▪CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management

Application

Packing List:

• Put the product in an ESD Bag, then placed in PE foams with outer carton packaging.
• The standard packing usually contains a main device, a warranty card and a user manual.
• Packing box dimension for 1pc: 23*16.5*5.8cm
• 20pcs in a packing box of 55.5*40*41cm dimension.

FAQ:

1. What is the power input?

A: For non-PoE managed switches, it receives DC12V~57V, for PoE managed switches, it receives DC48V~57V.

All the models support redundant input.

2. How can I install the device?

A: Each model in this series supports DIN35/Wall mounting.

It requires necessary accessories in installation like screws, mounting kit etc., some of them are included in the packing box, some are not.

3. Is it possible to print my logo?

A: Yes, it is usually on the top panel of the device.

4. Can you supply a customized PVC label with my model on it?

A: Yes, there is a description, model name, and logo on the front PVC mask, all is available for customization.

5. What is the packing list?

A: There is a device, protective foam, a user manual, a warranty card and a console cable in the box.

But SFP modules and power supply are NOT included, please purchase it from us separately.