

Add to Cart
8-Port Ultra PoE Industrial Gigabit Managed Switch
Features of industrial-managed switch
Specification of Gigabit PoE Switch
Port | 1 x 1000Mpbs SFP port, 1G/2.5G both supportive SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500 meters 9x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
VLAND ID | 4096 |
Jumbo Frame | 9.6KB |
MAC Address | 8K |
Switching features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 58Gbps(non-traffic jam) DRAM size: 128M Flash size: 16M |
Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port, transmission distance: 20Km, 40Km, 60Km, 80Km, 100Km |
LEDs | Power, network, fiber, POE, Alarm |
Power supply | POE power supply input voltage: 48V (max 57V) Single PoE power supply output power: 15.4W/30W/60W/90W(port 1~8) PoE output voltage: 48V Reverse connection: support |
Environment | Working Temp: -40°~ 75°C Storage Temp: -40°~ 85°C Working humidity: 10%~90%, non-condensing Storage humidity: 10%~95%, non-condensing |
Industry Standards | EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8 Traffic Control: NEMA-TS2 Vibration: IEC 60068-2-6 Freefall: IEC 60068-2-32 Shock: IEC 60068-2-27 Rail Traffic: EN 50121-4 |
Safety | CE Mark, commercial; CE/LVD EN60950 |
Mechanical information | Shell: Corrugated metal shell Dimension: 165 x 112 x 45.5mm Mounting method: Din-rail mounting |
Warranty | Replacement within 1 year; 3 years repairing |
Management Features
Application of Vlan managed switch
FAQ
Alarm ports
It is I/O ports, there is no serial communication.
Clink all in the management interface
Connect those 2 alarm ports to an external bell or siren
The bell/siren rings to warm the users if any port is down(remote real-time monitoring)
Management
Support Console/ SNMP/CLI(SSH/Lan port/Telnet...) and IP address management
Programmable POE&Power Supply
It continuously supplies 15.4W/30W/60W/90W standard power to PD devices from 8 POE ports(excluding combo ports)
We do not suggest connecting too many power-hungry devices to a single switch, this will affect the stability
Full-load, 720W POE output, 15A/48V power supply is required
Programmable POE output budget such as 480W/240W to match your in-hand power supply
It is recommended to set 480W for better stability and service life.