Rohs Unmanaged Poe Ethernet Switch 2 Fiber Port 4 Rj45 Network Din Rail

Industrial Ethernet Switch 4 PoE Port and 2 SFP For CCTV System

Introduction of Industrial Ethernet Switch

Introducing the IM-FP244FE the ultimate 10/100 Mbps industrial POE fiber switch! With its superior compliance to IEEE802.3af/at standards, this powerhouse is capable of powering POE IP cameras with ease, all through a simple Ethernet cable setup. Boasting an impressive power range of up to 100 meters, the IM-FP244FE operates at temperatures ranging from -40℃ to +75℃, features an IP40 protection degree and meets EMC industrial grade requirements. Its DIN rail installation method, coupled with its certifications for dangerous environmental conditions and FCC/CE standards, ensures that the IM-FP244FE is the ultimate choice for a reliable and continuous automation system operation.

Specification of Industrial Ethernet Switch

Key Features of Industrial Ethernet Switch

• Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
• IEEE 802.3af/at power on to 1 ~ 4 RJ45 ports
• 4 x 10/100Mbps Auto-sensing RJ45 ports
• 2 x 100Mbps SFP fiber ports
• 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
• Support Auto MDI/MDIX
• Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
• Max power to15.4W under af standard, 30W under at standard to each PoE port
• Detect the PoE models of electrical equipments.
• A store-and-forward switching mechanism
• Operating environment temperature:-40 ° ~75 ° c

Q&A of Industrial Ethernet Switch

1. Does the price include power supply and modules? (Excluding)
2. Can it be used together with modules/switches from other brands? (Yes)
3. What is in the packing box (equipment+foam cotton+manual+warranty card)
4. Can I use my own PVC film? (Yes)
5. Can I brush my own logo? (Yes)
6. Can I write my own content on the tag (usually posted on the side panel)
7. Can the optical port be plugged into a 100Mbps module (adaptive)

Application of Industrial Ethernet Switch