OLYCOM PoE Network Switch 8 Port 240W Budget Industrial Gigabit Ethernet CE FCC
Brand Name:OLYCOM
Certification:CE, FCC, RoHS
Model Number:IM-FP488GE
Minimum Order Quantity:1pc
Delivery Time:3-5 days
Payment Terms:T/T, Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Gigabit Network Switch CCTV PoE Switch 8 Port
Introduction to Gigabit PoE Switch
IM-FP488GE is the 10/100/1000 Mbps industrial POE fiber switch with below features
- comply with IEEE802.3af/at
- power on POE IP cameras through the Ethernet cable
- simple construction
- power range up to 100 meters
- DIN rail installation
- pass through dangerous environmental certification
- comply with FCC and CE standard
- Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
- IEEE 802.3af power on to 1 ~ 8RJ45 ports
- 8x 10/100/1000Mbps Auto-sensing RJ45 ports
- 4x 1000Mbps SFP fiber ports
- 6KV Ethernet surge protection, adapt to a harsh outdoor environment
- Support Auto MDI/MDIX
- Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
- IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
- Max power to15.4W under af standard, 30W under at standard to each PoE port
- Detect the PoE models of electrical equipments.
- A store-and-forward switching mechanism
The reliable industrial grade design could ensure continuous and stable operation of the automation system.
Specification of Industrial Fiber Switch
| Product Name | 10/100/1000Mbps Industrial PoE Fiber Switch(4F+8TP) |
| Model No. | IM-FP488GE |
| Port | 4x1000M SFP Fiber SM: 1310nm/1550nm, 20Km; 1490nm/1550nm, 40~120Km MM: 1310nm, 2Km; 850nm, 500-meter 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) 1x6-PIN Power Terminal Block |
| Protocol | IEEE 802.3(10Base-T) IEEE 802.3u(100Base-TX) IEEE 802.3ab(1000Base-TX) IEEE 802.3af 15.4W(PoE) IEEE 802.3at 30W(PoE+) |
| Switching Features | Transmission mode: storage and forward Forwarding delay: <10us System bandwidth: 24Gbps (non-traffic jam) Forwarding rate: 17.856Mmps MAC: 4K Packet buffer size: 1.75Mb |
| Network Media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, Fiber, Network, PoE PWR: Power Fiber: FX1, FX2, FX3, FX4 On: transmission is normal Off: transmission is NOT normal(faulty optical module or disconnected) Copper orange: PoE indicator On:PoE is working Off:PoE is not working or this is Non-PoE device Copper green: Speed indicator On:transmission speed is 1000Mbps Blinking: in transmission Off:Disconnected or working speed is 10/100Mbps |
| Power Supply | PoE power supply input voltage: 48V (max 52V) Single PoE power supply output power: 30W (port 1~8) PoE output voltage: 48V Reverse connection: support |
| PoE Wiring | 1/2 (V+), 3/6 (V-) |
| Environment | Working temperature: -40°C～75°C Storage temperature: -40°C～85°C Working humidity: 10%～90%, non-condensing Storage humidity: 10%～95%, non-condensing |
| Industry Standards | ESD: IEC61000-4-2, ±15KV air, ±6KV contact EFT: IEC61000-4-4, General ±6KV Surge: IEC61000-4-5, Differential ±2KV, Common±6KV |
| Certification | CE-EMC: EN 55032:2015+AC: 2016+A1:2020+A11: 2020 EN 55035:2017+A11: 2020/EN IEC 61000-3-2:2019/A1: 2021 EN 61000-3-3: 2013/A2: 2021/AC:2022 CE-LVD: EN IEC 62368-1: 2020+A11:2020 FCC: 47 CFR FCC Part 15 Subpart B(Class B) ANSI C63.4: 2014 |
| Mechanical information | Shell: Corrugated metal shell, IP40 grade level Dimension: 114*93*35mm Mounting method: Din-rail/Wall mounting Weight: 0.35Kg/0.45Kg(Net/Gross) |
| Warranty | 3 years, lifetime technical support |
Packaging Details
1. One product, one user manual, and one warranty card are inside
one box.
2. 20pcs boxes are in one carton (67*33*47cm)
FAQ
Q: Are you the real factory?
A: Yes, we are the real factory with 20 years of history.
Q: How long is the lead time?
A: Usually 3-5 working days, but it depends on the quantity.
Q: What is the warranty time?
A: 3 years for this product.
Q: What is your MOQ?
A: We do not have MOQ., 1 sample is available.
Q: What about the payment terms?
A: We can accept PayPal, Western Union, T/T and etc.
Q: Do you provide OEM service?
A: Yes, we provide OEM service. If you have requirements about the customized product, we also provide.
Application of CCTV PoE Switch
Photo
OLYCOM PoE Network Switch 8 Port 240W Budget Industrial Gigabit Ethernet CE FCC
Inquiry Cart
0