

Add to Cart
MIC300 Fixed Single Gas Detector
Explosion-proof, anti-lightning, anti-static, anti-reverse
connection, anti-EMI, EMC electromagnetic interference, anti-pulse
surge current impact
Comply with the latest national standards and obtain CMC measuring
instrument production license, explosion-proof certification, and
other qualifications
Three-wire 4-20mA standard signal output, 2 sets of relay switch
value, optional voltage output
At the same time, it has a standard bus system RS485 output (RTU
format), and optional integrated sound and light alarm.
It can be connected to a computer to monitor the concentration of
the field probe in real-time through the host computer and store,
analyze and print the data on the computer
Automatically track the zero point to prevent drift. Support OEM or
ODM customized service
Detection gas: oxygen
Detection principle: electrochemistry
Detection range: 0~1000, 2000, 5000, 10000ppm, 30%Vol, 100%Vol
optional
Resolution: 1ppm, 0.01%Vol, 0.001%Vol optional
Detection method: Diffusion measurement, pipeline type, flow type,
pump suction type can be selected
Installation method: wall-mounted fixed installation, optional
pipeline installation, flange installation
Detection error: ≤±3%(F.S)
Response time: T90≤15S
Output signal: three-wire system 4~20mA, relay (passive contact
output), bus system RS485 output
Alarm mode: sound and light alarm (optional), 1 or 2 passive
contacts (dry node) signal output
Working environment: atmospheric pressure ±30%, -40℃~+70℃, higher
temperature environment needs to be customized or equipped with a
pretreatment system
Relative humidity: ≤95%RH (non-condensing occasions), higher
humidity environment requires customization or optional
pretreatment system
Working voltage: 12~36V (DC), a single standard power supply is
24V, 1A or greater than 1A DC switching power supply, regulated
power supply
Sensor life: 2 years, optional 6 years
Explosion-proof form: flameproof type, explosion-proof grade
ExdⅡCT6
Connecting cable: three-wire shielded cable for 4-20mA, four-core
for RS485, when the distance exceeds 1000 meters
Single wire diameter ≥ 1.5 square millimeters; the shielding layer
is connected to the ground
Electrical interface: 3/4NPT, optional 1/2NPT, M20X1.5
Protection level: IP65
Dimensions: 200×180×60mm or 200×230×60mm (including sound and light
alarm)
Weight: about 1.2Kg