Industrial Electric Heating Mosi2 Heater 1800°C Mosi2 Heating Element
Minimum Order Quantity:1/pcs
Delivery Time:3workdays
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:China
Price:5/usd/pcs
Supply Ability:1000/pcs/month
Contact Now
Add to Cart
Verified Supplier
Location:
Zhengzhou Henan China
Address:
No. 26, Dongqing Street, High-tech Zone, Zhengzhou ,Henan, China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
Factory Customized 1800°C W U Type Mosi2 Heater For Furnace
Product details
Molybdenum disilicide(MoSi2) heating elements:
Mosi heating element is a kind of resistance heating element basically made of pure molybdenum Disilicide. In oxidizing
atmosphere, a layer of compact quartz protective film is formed on the surface of Mosi 2 element owing to the high temperature combustion, which prevents Mosi 2 from continuously oxidizing.
In oxidizing atmosphere, its Max temperature can reach 1800 c and its applicable temperature is 500-1700. It can be widely used in such applications as sintering and heat treatment of ceramics, magnet, glass, metallurgy, refractory etc. the commercial name of our Mosi 2 heating element is KERONE Mosi 2 Heating Element.
mosi2 heating elements:
1. According to temperature: 1700C and 1800C
2. According to Shape: U, W, I, U type L shape, W type L shape, Spiral types.
mosi2 heating element standard size:
M1700 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1800 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
M1900 type (d/c): dia3/6, dia4/9, dia6/12, dia9/18, dia12/24
Physics characters of mosi2 heating element:
Recommend surface load:
Installation of mosi2 heating element:
1)Vertically hanging
Under normal temperature, MoSi2 element is very brittleness, while under high temperature, it is plasticity, so the better way to install U Shape element is to hang it vertically from the furnace top through the support clamping chuck. The aim of such way is to avoid putting the mechanical stress directly to the element heat-generating end; otherwise the element will easily be broken.
2) Support clamp
Support clamp are applied to 9/18 and 6/12 two kinds of elements respectively. The support clamp supports the whole weight of the element and the position of the element is also determined by it, therefore, it must be installed carefully to assure the element vertically hung. In order to prevent the element from being over heated locally, the taper part of the element lower end must put into the furnace chamber.
mosi2 heating element Application:
Picture of mosi2 heating elements:
Order Guide
Dia 3/6 4/9 1800 1700 mosi2 heating elements heating element for zirconia sintering furnace
When you need it, please tell us the following data:
such as dia 6/12x200x180x30mm ( D1/D2xLexLuxA )
D1: Diameter of Hot Zone(mm)
D2: Diameter of Cold Zone(mm)
Le: Length of Hot Zone(mm)
Lu: Length of Cold Zone(mm)
A: Shank Spacing(mm)
Industrial Electric Heating Mosi2 Heater 1800°C Mosi2 Heating Element
Inquiry Cart
0