Product Details
50kW Genset of Syngas Generator Sets
Main configuration and features
- Highly efficient gas engine
- AC synchronous alternator
- Gas safety train and gas protection device against leakage
- Exhaust and jacket water heat exchanger
- Heating water and jacket water circulation system
- Expansion tank and water jacket heater
- Advanced engine control system, including: ignition system,
detonation control system, speed control system, air/fuel ratio
control system
- Strict shop test for all CHP unit
- Industrial silencer reduces the noise by 12-20dB(A)
- Unattached switch cabinet and electric control cabinet
- Multi-functional control system with easy operation Data
communication interfaces integrated into control system
- Lighting and smoke alarm system
- Monitoring battery voltage and charging automatically
- Auto refilling oil system
- Bus interface for connecting to higher level control unit
Special statement
- The technical data are based on a gas mixture of 60% CH4 and 40%
CO2 with a calorific value of 5.78 kWh/Nm³.
- The technical data is based on standard conditions according to
ISO8528/1, ISO3046/1 and BS5514/1
- The technical data is measured in standard conditions: Absolute
atmospheric pressure: 100kPa; Ambient temperature: 25°C; Relative
air humidity: 30%
- Rating adaptation at ambient conditions acc. to DIN ISO 3046/1.
- The tolerance for the specific fuel consumption is + 5 % at rated
output
Model | Elec. Power (kW) | Efficiency | Fuel Type | Engine Model | Alternator | Genset Controller |
Elec. | Thermal | Total | Manufacturer | Model | Manufacturer | Model |
JIG50N-M | 50 | 33.2% | 47.8% | 81.0% | NG | U08254N | STAMFORD | UCI 224 | SmartGen | HGM 9510 |
JIG50N-S | 50 | 35.0% | 46.4% | 81.4% | NG | U05244N | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50B-M | 50 | 33.2% | 47.8% | 81.0% | Biogas | U08254B | STAMFORD | UCI 224 | SmartGen | HGM 9510 |
JIG50B-S | 50 | 35.0% | 46.4% | 81.4% | Biogas | U05244B | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50S-S | 50 | 29.5% | 52.4% | 81.9% | Syngas | U14446S | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50P-S | 50 | 30.1% | 51.6% | 81.7% | LPG | U05246P | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50N6-M | 50 | 33.2% | 47.8% | 81.0% | NG | U08254N | STAMFORD | UCI 224 | SmartGen | HGM 9510 |
JIG50N6-S | 50 | 35.0% | 46.4% | 81.4% | NG | U05244N | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50B6-M | 50 | 33.2% | 47.8% | 81.0% | Biogas | U08254B | STAMFORD | UCI 224 | SmartGen | HGM 9510 |
JIG50B6-S | 50 | 35.0% | 46.4% | 81.4% | Biogas | U05244B | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50S6-S | 50 | 29.5% | 52.4% | 81.9% | Syngas | U14446S | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
JIG50P6-S | 50 | 30.1% | 51.6% | 81.7% | LPG | U05246P | Mecc Alte | ECP32 3L4 B | SmartGen | HGM 9510 |
Genset Model | JIG50N-M | JIG50N-S | JIG50B-M | JIG50B-S | JIG50S-S | JIG50P-S | JIG50N6-M | JIG50N6-S | JIG50B6-M | JIG50B6-S | JIG50S6-S | JIG50P6-S |
Prime Rating | kW | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
KVA | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 | 62.5 |
Standby Power | kW | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
KVA | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 | 68.75 |
Rated Voltage | V | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 | 230/400 |
Rated Current | A | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 | 90.2 |
Power Factor | - | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
Rated Frequency | Hz | 50 | 50 | 50 | 50 | 50 | 50 | 60 | 60 | 60 | 60 | 60 | 60 |
Rated Speed | rpm | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1800 | 1800 | 1800 | 1800 | 1800 | 1800 |
Company Profile
Other than base engine suppliers, Jigren supplies fully functional
and customer tailored power packages for easier handling of your
production and services for your customers. we can:
1. Redesign and re-calibrate for your specific power requirements
2. Redesign and reconfigure for your fuel type and energy specs
3. Fully packaged for easier end production of power units
4. Create Innovations to add value to your power products
Our core technology is gas engine electronic control systems which
is the only one capable of utilizing natural gas to power oil
drilling rig because it is totally competitive to handle sudden
load working conditions where require the most effective transient
responsiveness and reliability.
We have been listed as official supplier of Gas Engine Electronic
Control System to CNHTC(SinoTruk),SDEC and YuChai, who are the
major OEMs in China, for their heavy-duty truck application. We are
dedicated to building a better world through cleaner energy.