1000BASE-EX SFP 1310nm 40km DOM LC SMF Customized Fiber Optic Module

1000BASE-EX SFP 1310nm 40km DOM LC SMF Customized Fiber Optic Module

Product Descriptions

Olinkcom's OLSP3112L-CD40 supporting dual data-rate of 1.25Gbps/1.0625Gbps and 40km transmission distance with SMF and major brands compatible like Cisco, Juniper, Dlink, Brocade, Extreme,Huawei etc. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Product Features

● Supports 1.25Gbps/1.0625Gbps bit rates

● Duplex LC connector

● Hot pluggable SFP footprint

● 1310nm DFB laser transmitter and PIN photo-detector

● Applicable for 40Km SMF connection

● Low power consumption, < 0.8W

● Digital Diagnostic Monitor Interface

● Compliant with SFP MSA and SFF-8472

● Very low EMI and excellent ESD protection

● Operating case temperature: Commerical:0 to 70 °C

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Measured at 1250Mb/s with PRBS 2 2^{23 – 1}NRZ test pattern.

2. Unfiltered, measured with a PRBS2^{23 – 1} test pattern @1.25Gbps

3. Measured at 1250Mb/s with PRBS 2^{23 – 1} NRZ test pattern for BER < 1x10^-12

Applications

● Gigabit Ethernet

● Fiber Channel

● Switch to Switch interface

● Switched backplane applications

● Router/Server interface

● Other optical transmission systems

Ordering Information

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.