25G CWDM SFP28 Single Mode Fiber Transceiver 1350nm 10km DOM LC

25G CWDM SFP28 Single Mode Fiber Transceiver 1350nm 10km DOM LC

Support Extreme Switch 25G CWDM SFP28 1350nm 10km DOM LC SMF Optical Transceiver

Product Features
● Supports up to 25.78Gb/s bit rates
● compliant to IEEE 802.3cc
● compliant to SFF-8402 for SFP28 solution
● Digital Diagnostic Monitor Interface with SFF-8472
● Hot pluggable SFP+ footprint
● 1271nm ,1291nm,1311nm,1331nm ,1351nm,1371nm CWDM transmitter
● Applicable for 10Km SMF connection
● High transmission margin
● Low power consumption<1.5W
● Single 3.3V power supply
● Operating case temperature:
Commerical:0 to 70 °C Exceptional:-20 to 80 °C

Applications
● 25.78 Gb/s single lane
● Other optical links

Product Descriptions
Wavelength:1271nm ,1291nm,1311nm,1331nm,1351nm,1371nm CWDM DFB transceiver
Its Features:

• It is designed for use in 25Gb/s data rateover single-mode fiber for link length 10Km.
• The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for 25Gb/s single lane optical links.

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(E) =-20 to 80℃,VCC = 3.13 to 3.47 V)

Notes:
1. Average power figures are informative only, per IEEE 802.3cc..
2. Measured at the BER less than 5E^-5, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 25.78Gb/s.


What we can garantee for you:

• High Reliable Optical Components and Excellent Design
• High-Performance Features for Cost-Effective and Reliable Transmission
• Fully Tested for Compatibility in Host Devices
• Comprehensive Performance Test with the Advanced Equipment
• Nice Packing & Labeling for shipment

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.