10GBASE-LR 10G SFP+ Transceiver SMF 1310nm 10km Alcatel Compatible

10GBASE-LR 10G SFP+ Transceiver SMF 1310nm 10km Alcatel Compatible

Alcatel-Lucent SFP-10G-LR Compatible 10GBASE-LR SFP+ Transceiver SMF 1310nm 10km

The Alcatel-Lucent-LR compatible transceiver provides a high performance and cost-effective solution for 10.3125Gbps (10GBASE-LR) fiber connectivity over single-mode optical cable. It is programmed to be suitable for use with Alcatel-Lucent 10-Gigabit Ethernet Switches, Security gateway appliances and Network Adapters.

Product Features

● SFP+ Form factor compliant with SFP+ MSA SFF-8431 and SFF-8461 standard
● Hot-swappable input/output device plugs into 10 Gigabit Ethernet SFP+ port
● Digital optical monitoring (DOM) capability for diagnostics
● Supports up to 11.3Gb/s bit rates

● Alcatel Compatible

● Up to 10km Reach

● 1310nm Wavelength

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

Digital Diagnostic Specifications

The OLSP311XL-C(I)D10 transceivers can be used in host systems that require either internally or externally calibrated digital diagnostics.

Notes:

1.When Operating temp.=0~70 ºC,the range will be min=-5,Max=+75

2. Internally measured

3. The accuracy of the Tx bias current is 10% of the actual current from the laser driver to the laser

Wide Application
● Widely used on 10G switches, routers, servers, NICs and other transmission equipment
● Suitable for data center, enterprise wiring closet, radio & baseband unit and other environments

● 10GBASE-LR/LW at 10.3125Gbps

● 10G Fiber Channel

● CPRI and OBSAI

● Other optical links

The OLSP311XL-CD10 is a Class 1 laser product. It fully complies with the multi-sourcing agreement (MSA) which enables it to work in all MSA compliant platforms. OLSP311XL-CD10 must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.