Add to Cart
The AN2340 module is designed based on CC2340 of TI. The
SimpleLink™ CC2340R5 device is a 2.4 GHz wireless microcontroller
(MCU) targeting Bluetooth® 5.3 Low Energy, Zigbee®, IEEE 802.15.4,
and Proprietary 2.4 GHz applications. The device is optimized for
low‐power wireless communication with on‐chip dual image Over the
Air Download (OAD) support in Building automation (wireless
sensors, lighting control, beacons), asset tracking, medical,
retail EPOS (electronic point of sale), ESL (electronic shelf
label), and Personal electronics (toys, HID, stylus pens) markets.
The highlighted features of this device include:
* Support for Bluetooth ® 5 features: LE Coded PHYs (Long Range),
LE 2‐Mbit PHY (High Speed), Advertising Extensions, Multiple
Advertisement Sets, CSA#2, Direction Finding, as well as backwards
compatibility and support for key features from the Bluetooth ® 4.2
and earlier Low Energy specifications.
* Fully‐qualified Bluetooth ® 5.3 software protocol stack included
with the SimpleLink™ CC23xx Software Development Kit (SDK).
* Support for Bluetooth® mesh (low power nodes).
* Zigbee® protocol stack support in the SimpleLink™ CC23x0Rx
Software Development Kit (SDK).
* Ultra‐low standby current of 0.7 μA with RTC operational and full
RAM retention that enables significant battery life extension
especially for applications with longer sleep intervals.
* Very low average radio currents for duty‐cycled BLE use‐cases.
Average radio current ~6uA when operating in a Bluetooth®Low Energy
connection with TX output power = 0dBm and 1s connection interval.
Pin NO. | Name | Pin Type | Description |
---|---|---|---|
1 | DIO16_SWDIO | Digital | GPIO, SWD interface: mode select or SWDIO, high-drive capability |
2 | DIO17_SWDCK | Digital | GPIO, SWD interface: clock, high-drive capability |
3 | DIO20_A11 | Digital or Analog | GPIO, analog capability |
4 | DIO21_A10 | Digital or Analog | GPIO, analog capability |
5 | DIO24_A7 | Digital or Analog | GPIO, Analog capability, high-drive capability |
6 | RESET_N | Digital input | Reset, active-low, Internal pullup |
7 | DIO6_A1 | Digital or Analog | GPIO, analog capability |
8 | GND | Ground Pin | Connect to GND |
9 | GND | Ground Pin | Connect to GND |
10 | DIO_13 | Digital | GPIO |
11 | DIO_12 | Digital | GPIO, high-drive capability |
12 | DIO_11 | Digital | GPIO |
13 | DIO_8 | Digital | GPIO |
14 | GND | Ground Pin | Connect to GND |
15 | GND | Ground Pin | Connect to GND |
16 | VDD | Power | 1.8V to 3.8V main chip supply |
Visit www.rf-products.com for more information.