IPV4 IPV6 Ti CC3220 IoT Wifi Module OEM Cansec TA3220SSA-F

Brand Name:Cansec Wireless
Model Number:TA3220SSA-F
Minimum Order Quantity:100
Delivery Time:3~6 weeks
Payment Terms:T/T
Place of Origin:Beijing
Contact Now

Add to Cart

Verified Supplier
Location: Beijing Beijing China
Address: Rm.1002,B China Railway Build. No.28, Pingguoyuan Rd, Shijingshan BeiJing 10041,CHINA
Supplier`s last login times: within 48 hours
Product Details Company Profile
Product Details

Pkg. Pin


Pin Alias


Use


Select as Wakeup Source


Config. Addl. Analog Mux


Muxed With JTAG


Dig. Pin Mux Config. Reg.

Dig. Pin Mux Config.

Mode Value


Signal Name


Signal Description


Signal Direction


1RF OUTRF OUTN/AN/AN/AN/AN/AN/AFor CC3220NA-FN/A
2GNDGNDN/AN/AN/AN/AN/AGNDConnect groundN/A
3(7)ANTSEL1O onlyNo

User config not required

(8)

NoGPIO_PAD_ CONFIG_26 (0x4402 E108)0ANTSEL1(3)Antenna selection controlO
4(7)ANTSEL2O onlyNo

User config not required

(8)

NoGPIO_PAD_ CONFIG_27 (0x4402 E10C)0ANTSEL2(3)Antenna selection controlO
5nRESETGlobal resetN/AN/AN/AN/AN/AnRESETMaster chip reset. Active low. Internal PullupN/A
6(4)SOP2O onlyNoNoNo

GPIO_PAD_ CONFIG_ 25 (0x4402 E104)

0GPIO25GPIOO
9GT_PWM02Pulse-width modulated O/PO
2McAFSXI2S audio port frame syncO
See (5)TCXO_ENEnable to optional external 40-MHz TCXO

O

See (6)SOP2Sense-on-power 2I

For full Spec, please refer to our module datasheet

High Flash Capacity Rf Transceiver Wifi Switch Module IoT Solutions OEM Cansec TA3220SSA-F Ti CC3220 Wifi Module

Parameter
Min
Typ
Max
Unit
Current
Consumption
Sleep Mode(For Hibernate)
-
-
9
uA
Transmit Mode (@18dbm,for carrier)
-
400
450
mA
TX Power (For Carrier)
-
17
20
dBm
RX Sensitivity
-
-
-96
dBm
Distance
190
m
High Flash Capacity Rf Transceiver Wifi Switch Module IoT Solutions OEM Cansec TA3220SSA-F Ti CC3220 Wifi Module
Current Consumption
VBAT=3.6V
ModeParameterConditionsTypUnits
MCU ActiveTX Currnet1DSSS286mA
6OFDM255
54OFDM232
Rx Current1DSSS74
6OFDM74
MCU SLEEPTX Currnet1DSSS282
6OFDM251
54OFDM228
Rx Current1DSSS70
6OFDM70
MCU LPDSTX Currnet1DSSS266
6OFDM242
54OFDM1V7
Rx Current1DSSS53
6OFDM53
Peak Calibration currentVBAT=3.3V450
VBAT=2.3V670
1. TA3220S Module is designed based on TI’s CC3220S which is part of the SimpleLink™ microcontroller (MCU) platform, which share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 per cent code reuse when your design requirements change. For more information, visit Overview for SimpleLink™ solutions.
2. Start your Internet-of-Things (IoT) design with a Wi-Fi® CERTIFIED® single-chip MCU System-on-Chip(SoC) with built-in Wi-Fi connectivity. Created for the IoT, the SimpleLink™ CC3220x device family from Texas Instruments™ is a single-chip solution, integrating two physically separated, on-chip MCUs. • An application processor – ARM® Cortex®-M4 MCU with a user-dedicated 256KB of RAM, and an optional 1MB of XIP flash. • A network processor MCU to run all Wi-Fi and Internet logical layers. This ROM-based subsystem includes an 802.11b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure internet connections with 256-bit encryption.
3. The CC3220x wireless MCU family is part of the second generation of TI’s Internet-on-a-chip™ family of solutions. This generation introduces new features and capabilities that further simplify the connectivity of things to the Internet. The new capabilities including the following:
Enhanced Wi-Fi provisioning Enhanced power consumption
Enhanced file system security (supported only by the CC3220S and CC3220SF devices) Wi-Fi AP connection with up to four stations More concurrently opened BSD sockets; up to 16 BSD sockets, of which 6 are secure
HTTPS support
RESTful API support
Asymmetric keys crypto library
The CC3220x wireless MCU family supports the following modes: station, AP, and Wi-Fi Direct®. The device also supports WPA2 personal and enterprise security. This subsystem includes embedded TCP/IP and TLS/SSL stacks, HTTP server, and multiple Internet protocols. The device supports a variety of Wi-Fi provisioning methods including HTTP based on AP mode, SmartConfig™ Technology, and WPS2.0.
The power-management subsystem includes integrated DC-DC converters that support a wide range of supply voltages. This subsystem enables low-power consumption modes for extended battery life, such as low-power deep sleep, hibernate with RTC (consuming only 4.5 μA), and shutdown mode (consuming only 1 μA).
The device includes a wide variety of peripherals, including a fast parallel camera interface, I2S, SD, UART, SPI, I2C, and 4-channel ADC.

FAQ
Q1: Are you a factory or trade company?
A1: We are a professional factory with 25 years experience.
Q2: Can you accept OEM/ODM?
A2: Sure, we have rich OEM&ODM experience.
Q3: Do you have quality assurance?
A3; Each of our products has undergone quality testing and has two years of free after-sales service.
China IPV4 IPV6 Ti CC3220 IoT Wifi Module OEM Cansec TA3220SSA-F supplier

IPV4 IPV6 Ti CC3220 IoT Wifi Module OEM Cansec TA3220SSA-F

Inquiry Cart 0