Product Details
Adss 48 Core Aerial Single Mode Fiber Optic Cable
Description
- Can be installed without shutting off the power
- Light weight and small diameter reducing the load caused by ice and
wind and the load on towers and backprops
- Large span lengths
- Good performance of tensile strength and temperature
- Arc-erosion-resistant AT jecket
- The design life span is 30 years
- Package : 2~4km/ wooden drum
ADSS SINGLE JACKET
ADSS Single jacket suit for span 80-200m
ADSS DOUBLE JACKET
ADSS Double jacket suit for span 200-1500m
ADSS cable is loose tube stranded. Fibers, 250μm , are positioned
into a loose tube made of high modulus plastics. The tubes are
filled with a water-resistant filling compound. The tubes (and
fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a
non-metallic central strength member into a compact and circular
cable core. After the cable core is filled with filling compound.
it is covered with thin PE (polyethylene) inner sheath. After
stranded layer of aramid yarns are applied over the inner sheath as
strength member, the cable is completed with PE or AT
(anti-tracking) outer sheath.
The actual status of overhead power lines is taken into full
consideration when ADSS cable is being designed. For overhead power
lines under 110kV, PE outer sheath is applied. FOR power lines
equal to or over 110kV, AT outer sheath is applied. The dedicate
design of aramid quantity and stranding process can satisfy the
demand on various spans.
--- Outdoor aerial applications |
--- Low voltage transmission system(≤12 kV) |
--- Railway & Telecommunication pole route |
--- Subscriber & Local Area Network |
--- Voice, data, video & imaging system |
Characteristics:
Small cable Dia, light weight, low attached load on tower.
Tension strength is over 90KN.
Non-metal structure, good insulation, anti-thunder.
Fine production technology, even force for aramid fiber, with
superior stress flexibility.
Anti gun fire.
Anti electro-corrosion.
Adapt for bad climate.
Can construct without power cut, a power line failure doesn't
influence cable's normal transfer.
loose cover GYTA cable core, non-metallic core reinforced.
Tension units are elastic modulus aramid fiber.
Good ultra violwt radiation resistant property.
Company Profile

Shenzhen Chuanglixun Optoelectronic Equipment Limited is founded in
2010,locates in Shenzhen China.
Chuanglixun is an independentand innovative high-tech enterprise
integrating R&D,production and sales of optical fiber connector
production equipment and services.
Chuanglixun is focusing on the field of fiber optic polishing
solutions.We specialize in manufacturing fiber optic polishing
machine, design various optical fiber connectors polishing
fixtures, provide completed polishing process and materials for all
kinds of fiber optic connectors.Chuanglixun could provide the whole
sets of production equipments for fiber optic patch cords, such as
fiber optic polishing, end face inspection microscope, functional
inspection and detection, raw materials as fiber optic cables and
fiber connectors, processing tools and cleaning consumables.
During last 14 years, we have been comprised of a group of
experienced fiber optic professionals in areas of connector
polishing and assembling, outside plant installation, transmission
system, datacom, CATV and testing.We can provide not only products,
but also technical services and R & D support.
Shenzhen Chuanglixun Optoelectronic Equipment Limited is willing to
be your partner to reduce the production cost and improve the
production efficiency.