Horizontal FTTH 50Hz Fiber Patch Cord Manufacturing Machine Epoxy Curing Oven

Horizontal Wholesale FTTH Fiber Pigtail Patch Cord Fiber Optic Connector Heat Fiber Optic Epoxy Curing Oven

Description

Curing Oven is a type of universal curing oven for fiber optic connectors, it is available for general connectors (such as FC/SC/ST, MU/LC) after glue injecting. The heating board could contain 100 connector ferrules at most. There is indicator light, timer and temperature indicator. Simply operation and perfect solidified effect.

Key Features

Input voltage: 220 VAC 50 Hz, or 110 VAC 50 Hz;

2> Horizontal Heating Board, convenient for putting ferrules and connectors;

3> High efficiency, 100 ferrules heating synchronously;

4> Indicator shows temperature and time, high precision for temperature control;

5> Automatically timing, and buzzer alarm reminding after time is up.

Operating Instructions

Connected to single-phase power supply , 200V AC, 5A;

Switch power to ON, the red LED lights;

Program settings:

Press SETUP to display the corresponding control button into the program settings, there are two settings, one for time, another one for temperature;

Temperature control: set the curing requires constant temperature, press UP and DWON to add and subtract, display the desired temperature then press OK button to enter the time control. Factory settings default temperature: 100℃;

Time control: when it shows entry time control, press UP and DWON to adjust the time, time is the time required for curing continued at a constant temperature. After adjusted the desired time, press OK to enter operation. Factory setting: 30 minutes;

Curing, put the fiber connector into curing fixture, placing it in oven, heating board then covered with dust cover;

Press OK, curing, curing furnace heating temperatures to the specified time, timer automatic timer, temperature should keeping constant, arrived at the designated time, curing oven stopped heating, curing cycle ends;

If need cure again, time and temperature still stay the same then put connectors into fixture, placing it in oven, press AGAIN for next cycle of cure;

If you need to change the time and temperature, enter SETUP, adjust them.

Technical parameters

Attention

This device uses high-precision integrated circuit design, with PID function, need to prevent too hard and damage components during the processing.

If the device has any abnormal display, please notify the supplier for repair in time.

Shenzhen Chuanglixun Optoelectronic Equipment Limited is founded in 2010,locates in Shenzhen China.
Chuanglixun is an independentand innovative high-tech enterprise integrating R&D,production and sales of optical fiber connector production equipment and services.
Chuanglixun is focusing on the field of fiber optic polishing solutions.We specialize in manufacturing fiber optic polishing machine, design various optical fiber connectors polishing fixtures, provide completed polishing process and materials for all kinds of fiber optic connectors.Chuanglixun could provide the whole sets of production equipments for fiber optic patch cords, such as fiber optic polishing, end face inspection microscope, functional inspection and detection, raw materials as fiber optic cables and fiber connectors, processing tools and cleaning consumables.
During last 14 years, we have been comprised of a group of experienced fiber optic professionals in areas of connector polishing and assembling, outside plant installation, transmission system, datacom, CATV and testing.We can provide not only products, but also technical services and R & D support.
Shenzhen Chuanglixun Optoelectronic Equipment Limited is willing to be your partner to reduce the production cost and improve the production efficiency.