12 Way Universal Blade ATO ATC Fuse Blocks Negative Busbar Car Fuse Box

12 Way Universal Blade ATO ATC Fuse Blocks Negative Busbar Standard Blade Car Fuse Box

Product Name: 12 Way ATC ATO Fuse Block with Yellow Insurance Lock

Product Model: TR-FB616
Product Net weight: 326G

Product Gross weight: 356g

Product Size: 164.4*84.2*38.5mm
Product material: PBT body, PC waterproof dust cover, nickel -plated copper connection terminal, PP*40 sticker
Enter the rated voltage: 32V
Enter the rated current: 100A
Output maximum current: 30A per circuit 30A
Specification Light Color: None
Main line terminal: M5 thread thread
Main wire wire: # 4-6
Single -line terminal: M4 thread thread
Single wire wire:#12-16
Product installation range: It can be installed on a car, Yueshu, RV, bus, yacht, boat, etc.

Fuse Function of 12 Way ATY ATO ATC Blade Fuses Holders Car Automotive Fuse Block

When the circuit fails or abnormalities, the current is accompanied by the continuous increase of the current and the elevated current may damage some important devices or valuable devices in the circuit, which may also burn the circuit or even cause fire. The fuse protection electronic equipment is not damaged by current, and it can also avoid serious damage caused by electronic equipment due to internal faults. Therefore, there are rated specifications on each fuse, and the fuse will be melted when the current exceeds the rated specifications. If the fuse is placed correctly in the circuit, then when the fuse will increase to a certain height and a certain temperature at a certain height and a certain temperature, the fuse will be cut off and cuts the current, thereby protecting the safe operation of the circuit.

Advantages of 12 Way ATY ATO ATC Blade Fuses Holders Car Automotive Fuse Block

[1] The product adopts PBT anti -flame retardant high temperature and temperature and environmental protection material, which fully meets [The fuse seat must have good mechanical strength, insulation, heat resistance, and flame retardant. Conditions of short circuit and other phenomena
[2] All bus and fuse clips are nickel -plated copper, which are resistant to corrosion resistance and excellent electrical conductivity
[3] All fasteners are stainless steel, the insurance box input, the output end is fixed with a tight screw, which can be installed faster quickly, and the insurance box is fixed with a self -attack screw, which is simpler and safer to install.
[4] Product gift stickers, according to the name marked on the sticker, the corresponding sticker is on the electrical appliance we connected.
[5] Product distribution fuse, you can choose the fuse of the Abe according to the current electrical appliance.

Application of 12 Way ATY ATO ATC Blade Fuses Holders Car Automotive Fuse Block

This fuse holder can be directly connected to the line on the car/ship
[For example: roof light, car headlights, width lamps, fog lights, warning lights, car refrigerators, vehicle chargers, car fan, car TV, etc.]

Contact Details:

Andy Wu

Email: andy@tianrui-fuse.com.cn

MP/Whatsapp: +86 13532772961

Wechat: HFeng0805

Skype: andywutechrich

QQ: 969828363

Dongguan Tianrui Electronics Co., Ltd. was founded in 2010. It covers an area of 4,000 square meters and has a monthly production capacity of 50 million pieces. We are committed to be a comprehensive circuit protection component manufacturer and solution supplier. We are specialized in the design, development, production and sale of over-current protection, over-temperature protection, and over-voltage protection. Our products are widely used in consumer electronics, automobiles, ships, communications, power supplies, power tools, new energy and other fields. Our products cover auto-fuse, auto-fuse holder, current fuse, current fuse holder, temperature fuse, SMD fuse, resettable fuse, circuit breaker, thermal switch and so on. our products meet international standards including UL,

UR,CSA,CUL,VDE,TUV,PSE,CE,CCC,ROHS certification etc.

Partners:

Our products not only sell well in mainland China but also in North & South America, Southeast Asia and many other countries and regions. Our company has independent development and design capabilities, plastic molding, and metal stamping departments, and is equipped with multiple automatic fuse production lines and testing equipment and strives to find the best raw material suppliers. As we always put the quality at the first place, we have built a complete quality assurance system, which is the guarantee of the safety and stability of each product. Meanwhile, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.

We are looking forward to the cooperation with you in the near future.