Piggy Back Inline Blade Fuse Tap Adapter Holder Micro 3 Add A Circuit 12V 24V

Inline Blade Fuse Holder Micro 3 Add-A-Circuit Micro3 Fuse Tap in Piggy Back Fuse Holder 12V 24V

Specification of Micro 3 Fuse Tap

Product Name: Add-A-Circuit Micro 3 Fuse Holder

Rated Current and Voltage: 1-20A 32V

Fuse Size: Micro 3 Blade Auto Fuse

Contacts: Nickel Plated Brass

Wire Size: 16AWG to 20AWG

Wire Length: 150MM or Customized

Holder Color: Black

Type: Fuse Holder

Outer Material: PVC

Usage: Automotive Vehicle

Features of Micro3 Fuse Tap

1: It is suitable for car line installation/modification to take electricity without breaking the line.
2: The power supply position is the fuse box, insert one to fill one, and place the original fuse close to the plug seat, and place the fuse needed for the modification on the other seat (connected with the wire).

Application of Add-A-Circuit Micro3 Fuse Tap

It is widely used in automotive LEDs, automotive fuse boxes, automotive alarms, automotive positioners, automotive engines and other power-taking parts.

The Correct and Simple Operation Method for Micro 3 Fuse Holder

1: Connect the ground wire first. Please remember that the ground wire must be connected to the screw on the car steel plate; the plastic upper screw cannot be used as a ground wire (low current or no power)

2: First insert the fuse into the outer pin of the electrical appliance, and then insert the electrical appliance into the position you want to find, usually the ACC position. If you are looking for a location, pull out the original fuse first. Use fuse clips or needle-nose pliers! If it is empty, insert it directly! See if the LED test light is on (if there is no led test light, use the recorder and external equipment to test whether it works)

3: Remember the key point: Take the empty space inside the appliance, don't insert the fuse!

4: If there is no electricity, pull out the electrical appliance, turn it 180°, switch the two feet, and insert the car's fuse base again. When the power is successfully taken, insert the fuse of the original car to the inner position of the electric appliance to supply power to the equipment of the original car!

5: Special note: The fuse is powered by each fuse current. Low-current devices such as driving recorders and electronic dogs can be connected in series with the original car's fuse, but high-current devices such as air pumps are not allowed to be borrowed in series! If you still don’t understand, please contact us.

Customized Service of Micro 3 Inline Fuse Holder

Wire customization: conventional wire UL1015/1007 14-20AWG (optional)
Terminal customization: / end half stripped or fully stripped (connector terminals can be customized according to customer requirements)

Wiring Method of Add-A-Circuit Micro 3 Fuse Tap

First: prepare tools, scissors, wire strippers, wire clamps, dark wire car charger, fuse box.
Second: Connect the electric appliance and the double-headed shovel to the charging line (red) and the neutral line (black) of the car.
Third: twist the red and black wires of the dark line car into a spiral.
Fourth: Connect the electric appliance and the corresponding car charger live wire (red) to the wire clip, double-head shovel and the car charger zero wire (black) to the wire clip, pinch the wire clip with pliers, and close the lid.

Contact Details:

Andy Wu

Email: andy@tianrui-fuse.com.cn

MP/Whatsapp: +86 13532772961

Wechat: HFeng0805

Skype: andywutechrich

QQ: 969828363

Dongguan Tianrui Electronics Co., Ltd. was founded in 2000. It covers an area of 4,000 square meters and has a monthly production capacity of 50 million pieces. We are committed to be a comprehensive circuit protection component manufacturer and solution supplier. We are specialized in the design, development, production and sale of over-current protection, over-temperature protection, and over-voltage protection. Our products are widely used in consumer electronics, automobiles, ships, communications, power supplies, power tools, new energy and other fields. Our products cover auto-fuse, auto-fuse holder, current fuse, current fuse holder, temperature fuse, SMD fuse, resettable fuse, circuit breaker, thermal switch and so on. our products meet international standards including UL, UR,CSA,BSI,CUL,VDE,TUV,PSE,CE,CCC,ROHS certification etc.

Partners:

Our products not only sell well in mainland China but also in North & South America, Southeast Asia and many other countries and regions. Our company has independent development and design capabilities, plastic molding, and metal stamping departments, and is equipped with multiple automatic fuse production lines and testing equipment and strives to find the best raw material suppliers. As we always put the quality at the first place, we have built a complete quality assurance system, which is the guarantee of the safety and stability of each product. Meanwhile, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.

We are looking forward to the cooperation with you in the near future.