12 24 48cores GYTS Loose Tube Fiber Optic Cable All Dielectric Self Support

12 24 48 Fibers Loose Tube Armored Outdoor Underground Duct Aerial Fiber Optic Cable Wire

Description:

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.

Features:

GYTS cable complies with Standard YD/T 901-2001as well as IEC 60794-1.
Good mechanical and temperature performance
High strength looes tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Crush resistance and flexibility
The following measures are taken to ensure the cable watertight:
Single Fiber Reinforced Plastic as the central strength member
Loose tube filling compound
100% cable core filling


Application:

Long-distance telecom, LAN in high-voltage area or access to telecom network
Especially for power transmission system. excessive thunder areas and high electromagnetic interference.
Recommended layings methods
High-voltage area, Aerial

Advantages:

1. Low dispersion and attenuation.
2. Proper design, precise control for fiber excess length and distinct stranding process render the cable excellent mechanical and
environmental characteristics.
3. Anti-electromagnetism ability.
4. Small cable diameter, light cable weight, easily to install.

Performance :

Max attenuation : 0.35dB @ 1310nm and 0.21dB/Km @1550nm Fiber : G652D
Installation: Suitable for aerial or duct
Application: Apply to Long distance communication system, Local area network system and Subscriber network system
Operating temperature : -40°C~+70°C
Permisson bent radius Static : 10 times O.D.
Dynamic : 20 times O.D.

Technical Parameters:

Package and Delivery

Shenzhen HODAS Technology Co., Ltd. Located in Shenzhen China. HODAS Solar is specialized in manufacturing Solar Energyts. , HODAS Solar has supplied more than 3GW photovoltaic solar panels and millions of units of batteries , solar charger controllers and solar inverters .HODAS Solar is focusing on product development , production , system integration , sales and service . Products include Poly-crystalline PV panel , Mono-crystalline PV panel , Lithium Battery ,Valve Regulated Lead Acid ( VRLA) Battery ,solar charge controller, solar inverter, Turn-key completed Off Grid and On Grid solar systems .

We aim to develop, manufacture, and deliver the most reliable and cost-effective solar energy solutions to every corner in the world . Our Solar PV module factory covers 90,000 Square Meters ,has more than 750 employees .With an emphasis on management , research and development , HODAS Solar continuously manufactures leading-edge products . The modules range from 5W~500W and are approved by TUV , UL , CE ,IEC61215 ,IEC61730 ,CSA ,CEC ,JET . The production capacity of solar panel has reached 600MW in 2017 . Our Battery factory covers 80,000 Square Meters ,has more than 700 employees .The batteries made by HODAS Solar include Lithium Battery , 2V&12V VRLA AGM type , VRLA GEL type , OPzS and OPzV type which can be applied in Solar Power Plant Storage , Wind Energy Storage, Telecommunications ,UPS , Fire Alarm System , Emergency Lighting , etc . The production capacity of battery has reached 1.5 million units in 2017 . Our Solar Charge Controller and Inverter factory covers 11,000 Square Meters ,has more than 150 employees .The charge controllers and inverters made by HODAS Solar include PWM Controller , MPPT Controller , pure sine wave inverter . All types of inverters and controllers are approved by CE , UL . The products have been exported to more 80 different countries .

HODAS Solar also offers the turn-key integration system that incorporate solar , LED lighting , energy products . We have installed and invested several both jointly and independently in China and abroad . he company follows ISO9001 quality system strictly . Up to date , HODAS Solar has largely realized production line automation with imported advanced equipment and technology from Germany , USA and Japan .We keep strict controls on incoming inspection , production process , finished goods inspection. All products are certified by TUV IEC(Germany) ,UL(America) ,JET(Japan),CSA( Canada) ,CEC( Australia ) and CE . With excellent quality and good reputation , HODAS Solar Panel and battery have been exported to more 120 different countries in the worldwide , especially to America , Germany , UK , Japan . HODAS Solar will continue to innovate and improve its renewable energy product portfolio , to help the world create a cleaner and brighter future .