Portable Electric Car Chargers 3.6kW 16A 250V Mobile EV Chargers with Temperature Sensor Schuko Plug EN62752 CE
Brand Name:ANS
Certification:TUV/CE/UL/RoHS/REACH
Model Number:HNAPO-3
Minimum Order Quantity:5pcs
Delivery Time:10-30days
Payment Terms:T/T, Western Union,Paypal, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu China
Address:
No.1,Floor 3,No. 366,North Section of Hupan Road,Chengdu
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
IP67 Type B protection Smart EV charger 16A 3kW with temperature sensor Schuko Plug
This EV portable chargers is type 2 with schuko plug, max 16A, 18 foot cable with ControlBox, a portable and simple charging solution when you travel or you are away from a traditional charging station. The charger allows you to charge your electric/hybrid vehicle's type 2 port via the schuko plug. Equipped with overvoltage, overheat and overcurrent protection. Indicators on the charging station help to show the stages of charging and show errors.
Specification
| Input/Output voltage | AC110V/230V |
| Input frequency | 50/60Hz |
| Max.output power | 1-Phase up to 3.7kW(@230V 16A) |
| Max.output current | 16A for 1-Phase |
| Standard | 16A for 1-Phase |
| Certificate | EN62752 |
Function and Accessory
LED indicators | 30 RGB LED lights |
Display Screen | 1.3-inch OLED screen |
RCD | Type B |
Current adjustment | Yes |
Delay charging adjustment | Yes |
Working environment
| Protection degree | IP 67 |
| Operation temperature | -30℃~+60℃ |
| Relative humidity | ≤95%RH |
| Operating elevation limit | ≤2000m |
| Cooling | Natural air cooling |
| Standby power consumption | <0.5W |
Protection
| Over voltage protection | Yes |
| Under voltage protection | Yes |
| Overload protection | Yes |
| Short circuit protection | Yes |
| Leakage protection | Yes |
| Over-temp protection | Yes |
| Lightning protection | Yes |
Mechanical parameters
Charging cable | 5m (Standard configuration) |
Control box | HxWxD=200mm*90mm*52mm |
Weight | 2.5kg |
Colour&Materia | Black;Tempered Glass,PC |
Product Information
OLED Display
TEMPERATURE CONTROL
The power plug contains a temperature sensor inside. This
temperature sensor is a negative temperature coefficient
thermistor (NTC), which can feedback the temperature change of the
power plug in real time.
Control process
When the temperature of the power plug reaches up to 85 and
lasts 10 seconds, the temperature control protection is turned on,
the charging is stopped, and the OLED screen displays the over
temperature fault.
After waiting for the power plug cooling down to 75 and lower
and lasts 10 seconds, the device will automatically start to
continue charging again.
Fault handling
Check power plug and socket are in close contact.
Check the cable diameter of the socket.
Do not leave the device exposed to sunlight, but also do not cover
it.
Installation Case
Other models, 7kW and 11kW
Certification
Portable Electric Car Chargers 3.6kW 16A 250V Mobile EV Chargers with Temperature Sensor Schuko Plug EN62752 CE
Inquiry Cart
0