B Type 400V RCCB Residual Current Circuit Breaker ELCB 63 Amp 4 Pole 30ma
Brand Name:ANS
Certification:TUV,CE
Model Number:ANS-RCD-63A
Minimum Order Quantity:1pc
Delivery Time:20-30days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu China
Address:
No.1,Floor 3,No. 366,North Section of Hupan Road,Chengdu
Supplier`s last login times:
within 34 hours
Product Details
Company Profile
Product Details
B Type RCCB Residual Current Circuit Breaker DC ELCB 2P 63 Amp 30mA Type B 10KA RCD
- Residual current circuit breakers RCCBs are the safest devices for detecting and preventing the tripping of leakage currents, thus ensuring protection against electric shocks caused by indirect contact.
- These devices must be used in series with MCBs or fuses to protect them from the potentially damaging thermal and dynamic stress of any overcurrent.
- They can also be used as the main disconnecting switch upstream of any derived MCB.
- The main purpose of the RCCB is to provide protection against direct and indirect contact with people or livestock, as well as possible fire, from shocks caused by electrical leakage, which can be fatal.
Technical Data
| Mode | Electromagnetic | ||||||||
| Type(wave form of the earth leakage sensed) Rated current In | 63A | ||||||||
| Poles | 4P | ||||||||
| Rated voltage Ue | 4P 415V~ | ||||||||
| Insulation voltage Ui | 500V | ||||||||
| Rated frequency | 50/60Hz | ||||||||
| Rated residual operation current(I△n) | 30mA | ||||||||
| Rated residual operating current(I△dc) | 6mA | ||||||||
| Rated residual making and breaking capacity (I△m) | 500A(In≤40A), 10In(In＞40A) | ||||||||
| Short-circuit current Inc= I△c | 10,000A 10000 | ||||||||
| Break time under I△n Rated impulse withstand voltage(1.5/50) Uimp | ≤0.1s 4000V | ||||||||
| Dielectric test voltage at ind.Freq. for 1min | 2.5kV | ||||||||
| Electrical life | 2,000 Cycles | ||||||||
| Mechanical life | 4,000 Cycles | ||||||||
Installation
| Contact position indicator | Yes | ||||||||
| Protection degree Ambient temperature(with daily average≤35℃) | IP20 -5℃~+40℃ | ||||||||
| Storage temperature | -25℃~+70℃ | ||||||||
| Terminal connection type | Cable/Pin-type busbar/U-type busbar | ||||||||
| Terminal size top/bottom for cable | 35mm2 18-3AWG | ||||||||
| Terminal size top/bottom for busbar | 35mm2 18-3AWG | ||||||||
| Tightening torque | 2.5Nm 22In-lbs | ||||||||
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device | ||||||||
| Connection | Power supply in both directions | ||||||||
Tripping Current Range
| Lagging Angle 0° | I△n＞0.01A 0.35I△n≤I△≤1.4I△n | I△n≤0.01A 0.35I△n≤I△≤2I△n | |||||||||||||||||||||||||||||
| 90° | 0.25I△n≤I△≤1.4I△n | 0.25I△n≤I△≤2I△n | |||||||||||||||||||||||||||||
| 135° | 0.11I△n≤I△≤1.4I△n | 0.11I△n≤I△≤2I△n | |||||||||||||||||||||||||||||
RCD Protection
- This device is very important in electrical wiring installations as a life protection device against electric shocks. Other circuit breakers can only detect overcurrent and short-circuit faults, but not leakage.
- This is why the RCCB is very important, only this device can detect electrical leakage, which can cause injury or death to people and can lead to the risk of fire. When designing your distribution panel board, please ensure that this device is included in our planning of the installation.
- Protection in case of indirect contact (indirect protection of persons) and fault protection when disconnection is caused by an impermissibly high touch voltage caused by a short circuit in an exposed conductive part.
- Protection in case of direct contact (direct protection of persons) - disconnection as additional protection in case of direct contact with live conductors. If the device has a rated residual current of In - 30 mA, dangerous inrush currents are disconnected within a short time.
Certification:TUV
B Type 400V RCCB Residual Current Circuit Breaker ELCB 63 Amp 4 Pole 30ma
Inquiry Cart
0