250V 250C Bimetal Temperature Switch Adjustable Bimetal Thermostat Switch 70mm
Brand Name:AMPFORT
Certification:RoHS,REACH
Model Number:BW-250C
Minimum Order Quantity:2000 Pieces
Delivery Time:7-10 Workdays
Payment Terms:T/T,Paypal, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
No.1, Yixiang ,Liwu Industrial Park,Liwuyuan Village,Xihu District, Shilong Town,Dongguan 523325,Guangdong ,China
Supplier`s last login times:
within 29 hours
Product Details
Company Profile
Product Details
Bimetal Temperature Switch 10A 250V 250℃ 20AWG 70mm Thermostat For Hair Curler Straightener
Application scope Of The Bimetal Temperature Switch 10A 250V 250℃
BW Series thermal protector has small, nimble, long life and other
characteristics, widely used in a variety of tubular motor,
induction cooker, vacuum cleaners, coils, transformers, electric
heaters, ballast, electric appliances, fluorescent lamp ballasts,
auto motor, IC and general electrical equipment overheating over
current double protection.
Product Features Of The Bimetal Temperature Switch 10A 250V 250℃
BW series thermal protector is to adopt a certain geometry of
bimetallic strip, without auxiliary mechanism, only by the
bimetallic strip themselves feeling gentle heating current, rapid
changes in the state of the bimetallic element, direct drive
contact automatic cutting and processing circuit, overheat and
overload protection
Product dimension Of The Bimetal Temperature Switch 10A 250V 250℃
Plastic shell: 4.2mm×8.0mm×20.0mm
Metal shell :3.8mm×7.4mm×20.0mm
Dimension: mm
| Code | Name | Material | Code | Name | Material |
| A | Metal case | δ0.4 with SPCE | G | Base | Cu H62 |
| B | Shrapnel | Bronze | H | Static contact | AgNi10/Cu |
| C | Bimetal | BR-1 | I | Insulator | PBT-VG30 |
| D | Action contact | AgNi10/Cu | J | Insulation sleeve | Polyester sleeve |
| E | Sealants | Epoxy resin | K | Immersion Tin | Environmental tin |
| F | Cable | 20AWG |
Operating temperature Of The Bimetal Temperature Switch 10A 250V
250℃
Operating temperature(OFF): 250±5℃
Operating Temperature characteristics (regular) table
| Part number | Operating temperature (℃) | Reset Temperature(℃) | Part number | Operating temperature (℃) | Reset Temperature (℃) |
| BW-50℃ | 50±5 | 30±8 | BW-105℃ | 105±5 | 70±15 |
| BW-55℃ | 55±5 | 35±10 | BW-110℃ | 110±5 | 75±15 |
| BW-60℃ | 60±5 | 40±10 | BW-115℃ | 115±5 | 75±15 |
| BW-65℃ | 65±5 | 45±10 | BW-120℃ | 120±5 | 80±15 |
| BW-70℃ | 70±5 | 45±15 | BW-125℃ | 125±5 | 85±15 |
| BW-75℃ | 75±5 | 50±15 | BW-130℃ | 130±5 | 90±15 |
| BW-80℃ | 80±5 | 55±15 | BW-DCM-135℃ | 135±5 | 95±15 |
| BW-85℃ | 85±5 | 55±15 | BW-DCM-140℃ | 140±5 | 100±15 |
| BW-90℃ | 90±5 | 60±15 | BW-DCM-145℃ | 145±5 | 105±15 |
| BW-95℃ | 95±5 | 65±15 | BW-DCM-150℃ | 150±5 | 110±15 |
| BW-100℃ | 100±5 | 65±15 | Customized available | ||
Reliability Test Of The Bimetal Temperature Switch 10A 250V 250℃
| Appearance: | Thermal protector of shell can not have burrs, the phenomenon such as corrosion, crack, deformation；marking should be correct, correct, clear, durable resistance to wipe； |
Performance: Electrical rating: | Rated current:AC250V/10A Maximum short circuit current:DC 12V 100A Minimum use of electric current:DC 5V 10mA |
| Contact Resistance: | Contactor in the closed state, thermal protector the contact resistance between the two touch points should be not greater than 50 m Ω. |
| Insulation Resistance: | Insulation resistance should be more than 100 m Ω . |
| Electric Strength: | For thermal protector applied between the following parts of the
basic frequency is 50 hz sine wave test voltage (RMS), lasted 1 s
shall be no flashover or breakdown phenomenon In the condition of thermal breaking contact, between the lead wire: 500V In contact normally closed conditions, between lead and shell surface of the insulating layer: 1500V |
| Moisture-proof: | Place it in the ambient temperature is 25 ℃, relative humidity is 95% for 10 hours later, meet requirements 6.4 and 6.5, and no abnormal change in appearance structure. |
| Heat Cycling: | Place at 20 ℃ and + 90 ℃ temperature every 2 hours , cycle over 10 times, comply with requirement 6.4, 6.5, and no abnormal change in appearance structure. |
| Heat Resistance: | Placed 10 hours later in 140 ℃ temperature, meet requirements 6.4 and 6.5, no abnormal change in structure and appearance. |
| Repeated opening and closing the durability: | In room temperature, connected to AC 50HZ&220V&power factor COS∮ = 0.7 under the condition of rated load test after 2000 times, rated operating temperature should be within + / - 5 ℃ of initial value, and contact no welding, after 8000 times thermal protector should still can continue to work. |
| Cold endurance: | Placed in - 20 ℃ temperature for over 10 hours, satisfies
requirement 6.4 and 6.5, no abnormal change in structure and
appearance. Action the change in temperature is less than 5 ℃ |
| Vibration: | Vibration frequency 50HZ,amplitude 0.35 mm,last 90S of fixed frequency test,test after the rated breaking temperature shall satisfy the requirements of 6.2. |
| Drop impact resistance: | Any coagulation from 1200 mm height fell to the ground after 3
times, its appearance structure without changes. Operating temperature is within 5℃ |
| Wire pull strength performance: | With not less than 30 n axial static tension, lasted for 5 seconds, fuses without fracture, loose, falls off phenomenon. |
250V 250C Bimetal Temperature Switch Adjustable Bimetal Thermostat Switch 70mm
Inquiry Cart
0