Junbond 12m Long Silicone Rubber Adhesive Sealant Interior Window Sealant

High Modulus Suitable For Interior And Exterior Applications Nail Free Sealant

Junbond^® JBN1 is a synthetic rubber adhesive specially formulated for construction applications. With excellent adhesion capabilities, the product is ideally suited to most building materials including concrete, galvanized metals, aluminium, and many different kinds of wood.

Junbond^® JBN1 Features:
1, Super strong initial viscosity, high bonding strength;
2, Wide range of uses, the vast majority of substrates can be bonded, and even wet wood can be bonded;
3, Flexible, weathering, waterproof, non-brittle, will not affect the adhesion of buildings contraction movement;
4, Will not subsidence, can be sealed, dry paint;
5, Does not contain formaldehyde, benzene and other harmful substances;
6, Anti chemical corrosion, anti cold, high temperature.

Instructions:
1, Clean the construction surface to ensure that no oil and dirt;
2, Cut the nozzle, put on the plastic nozzle, with a sealed gun out;
A. Dry bonding method: (for light materials and light pressure to bear the junction) to the shape out of a few lines out nail glue, each line separated by 40 cm; with adhesive side of the pressure to the bonding , And then gently pull the plastic to be volatile to the minute, and then pressed on both sides can be.
B. Wet adhesive method: (for heavier materials)
Apply glue-free glue according to the above method, and then use clamp, nails or screws and other tools to clamp the two sides of the adhesive or nail; to glue dry (about 24 hours) and then remove the clamp. Free nail glue in 20 minutes after bonding can still be moved to adjust the bonding position, bonding within 2-3 days after more stable, 7 days to reach the best results.

Demolition :

* simple

* traceless dismantling

* protect the wall

* repeatedly use

* blow with a hair dryer for 2 minutes to soften the gel

* shake up & down to take down the shelf slowly

* using a blade to cut off excess glue

Application Areas:

*Ceramic Tiles

* Wooden floor

* Door frame edge

* Baseboard

* Marble

* Advertisement wording

* Mirror

* Metal

* Glass

* Wood

Color

* White

Reminder:

In winter, due to temperature, the gel curing time will increase, so the normal gel curing time can prolong the gel aging period, and the gel bonding strength has been enhanced. It is suggested that the curing time of colloid should be 72 hours.

Application:

Junbom Hui Bei Factory

Package & Delivery

Exhibition

FAQ

Q1: Are you factory?

A1: Yes, we are factory.

Q2: Can I do an OEM?

A2: Yes,we do the brand, logo as your requirements.

Q3:Why we choose you? What is your strength?

A4:With 30 years experiences in this field, we are a professional supplier of the well-know customers. Our facilities conform to the standard audit requirement and our products meet the certification terms from different countries and areas.

Q4: What other products do you have?

A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon gun etc.

Q5:What is your sample policy?

A5: We can supply 2-3 samples for free, but as this is aerosol products with pressurized gas, it is dangerous goods, we only supply the Cured sample.And the freight cost need to be prepaid by customers.

Q6: Agent's wanted?

A6: Welcome general agent all over the world.

If you want to know more details information, pls just feel free to contact us! :)

Since its establishment, Junbom Group has been focusing on the R&D, production and sales of one-component silicone rubber, two-component silicone rubber, polyurethane foam, beauty seam agent, and environmentally friendly high-elastic rubber. Six production bases have been established (Foshan Jiaolang New Material Technology Co., Ltd., Foshan Pengda New Material Technology Co., Ltd., Hubei Junbond New Material Technology Co., Ltd., Yichang Zhongzhi Environmental Protection Technology Co., Ltd., Anhui Weilang Chemical Technology Co., Ltd. , Guangdong Junbond New Material Technology Co., Ltd.), with a total production area of ​​more than 100,000 square meters, more than 1,200 employees, and total annual sales of up to 1.5 billion.

Since the birth of the group in 2016, it has entered a period of rapid development, creating the "junbom speed" in the industry. In the future, Junbom will make unremitting efforts, continue to explore, and create a new Junbom model in the industry.

A perfect production system has created a first-class enterprise, and has been committed to providing customers with first-class quality products. Now we have more than 30 advanced automatic production lines for silicone rubber, 8 production lines for styrofoam, 3 automatic production lines for beautiful seam agent, and 2 automatic production lines for environmentally friendly high-elastic rubber. All products use high-quality and high-standard raw materials. Scientific control and effective supervision of each process link of the company ensure that every product produced meets industry standards.

The overall situation will never allow us to relax, pursue the common development vision of "Going with the Junbom and Prosper the State", build the "Junbom Platform", and truly realize the win-win situation of upstream partners, outstanding employees of the group, and high-quality downstream customers.