Welding Rod Ss 308l Stainless Steel Welding Electrodes AWS E308l 16

AWS E308l 16 Welding Rod 3/32 Ss 308l Stainless Steel Welding Electrodes

E308L-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes

E308L-16 is a kind of Titanium calcium type coating with ultra-low carbon Cr19Ni10 stainless steel electrode. Carbon content of deposited metal is less than or equal to 0.04%. The intergranular corrosion resistance is good. Excellent welding performance and heat resistance, high strength coating, the porosity resistance is good. AC/DC both can be applied.

E308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of Types 321 and 347 stainless steels provided the service temperature is less than about 700°F (375°C). The basic-rutile thin coating of 308L-16 gives an excellent combination of welding performance in all positions and a high resistance to cracking. Operates on AC or DC current.

Conform to Standard

GB/T 983 E308L-16
AWS A5.4 E308L-16

Purpose: Used for welding ultra-low-carbon Cr19Ni10 stainless steel structures, and also used for 06Cr18Ni11Ti corrosion-resistant stainless steel structures whose working temperature is lower than 300°C. Mainly used in the manufacture of synthetic fiber, chemical fertilizer, oil and other equipments

Chemical Composition(%)

Mechanical Properties of Deposited Metal

Notes:

1. The electrode must be preheated at the temperature of 300°C for 1 hour. Preheat the rod whenever it is used

2. Preferred DC power supply, electric current should not be high.

Established in 1993 as a township enterprise

Cover an area of over 3 million square meters with staff of more than 5500.

Vice President Company of CANSI

(China Association of National Shipbuilding Industry)

Six main products series (4.3 million tons)
1. Welding Materials
2. Shipbuilding section
3. High-strength pre-stressed concrete steel bar
4. Forging ingot series
5. Steel ball series for bearing & mining industry
6. Flange & End Plate

As our develop strategy, we have been focusing on the complete production process mode which we deem will bring us synergy, so recently, another new product, i.e. welding consumables will be added to our catalog which will cover all series such as gas-shielded solid welding wire、flux cored wire、submerged arc wire、argon arc wire etc.

We have two main advantages for LT welding wires:
Fully integrated production process, i.e., with the support of upstream world class steel making facilities in house from same group company.
Newly developed production process with latest technology and know-how, i.e., fully automatic production which will be the assurance of quality control.