035" Gas Shielded Arc Welding Wire Er316l Welding Wire Stainless Steel

ER316L Stainless Steel Gas Shielded Arc Welding Wire

Introduction:

The main component of JQ.H0Cr19Ni12Mo2 is 18Cr-12Ni-2Mo; it is Stainless steel MIG welding wire. It is all position welding. The weld-ability is good. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. It has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt corrosion because it contains Molybdenum.

Confirm to standard:

AWS 5.9
ASME SFA 5.9
AWS ER 316/ ER 316L
UNS S31683

Purpose:

It is widely used in petrochemical, chemical fertilizer equipment such as 022Cr17Ni12Mo2 (SUS 316L) and other materials of welding.

Chemical Composition(%)

Reference Current (DC⁺)

Notes:

1. Shield gas: Must ensure not to operate with impurity shield Gas.
Recommendation Rate of mixed gas: Ar+1-3%O2.
2. Operation flow rate of shield gas: 20-25L/min.
3. Electrode extension: 15-25mm
4. The welding should be operated in clean surface without rust, moist, oil contamination and dust.
5. Prevent affected of wind when wind speed reach 1.5m/s to avoid bubbles generated.

The above suggestions are for reference purpose. Evaluate and determine the situation of the scene before starting the wielding process.

Established in 1993 as a township enterprise

Cover an area of over 3 million square meters with staff of more than 5500.

Vice President Company of CANSI

(China Association of National Shipbuilding Industry)

Six main products series (4.3 million tons)
1. Welding Materials
2. Shipbuilding section
3. High-strength pre-stressed concrete steel bar
4. Forging ingot series
5. Steel ball series for bearing & mining industry
6. Flange & End Plate

As our develop strategy, we have been focusing on the complete production process mode which we deem will bring us synergy, so recently, another new product, i.e. welding consumables will be added to our catalog which will cover all series such as gas-shielded solid welding wire、flux cored wire、submerged arc wire、argon arc wire etc.

We have two main advantages for LT welding wires:
Fully integrated production process, i.e., with the support of upstream world class steel making facilities in house from same group company.
Newly developed production process with latest technology and know-how, i.e., fully automatic production which will be the assurance of quality control.