Removable Tvr Ball Vacuum Mvr Polluted Water Evaporator For Paper Making Salt Making
Brand Name:HANPU
Certification:ISO9001,CE
Model Number:HP-MEE
Minimum Order Quantity:1 set
Delivery Time:90 days
Payment Terms:T/T, L/C, D/A, D/P, Western Union
Contact Now
Add to Cart
Verified Supplier
Address:
Junmin Road, Huangqiao Industrial Park, Taixing, Jiangsu, China (Mainland)
Supplier`s last login times:
within 32 hours
Product Details
Company Profile
Product Details
Removable Industrial Tvr Ball Type Vacuum Mvr Polluted Water Evaporator For Paper Making Salt Making
Process description – Example Parallel flow principle
The solution enters the evaporator circuit of the first stage. Here it mixes with the circulated solution and is heated in heater H with steam. In the evaporator V1, solvent (water) evaporates while cooling the solution to the boiling temperature.The first stage's evaporator circuit is where the solution is introduced. Here, it combines with the circulating solution and receives steam heating in heater H. In the evaporator V1, the water-based solvent evaporates as the solution is cooled to boiling point. The second stage, which is run at a lower temperature and lower pressure, receives the solution after that. The solution is evaporated in the second stage using the vapour produced in the first stage as a heating medium. Depending on the elevation of the solution's boiling point and the frame circumstances at the time, this procedure may be repeated numerous times.
Structure
Multiple-effect falling film evaporator consists of (first-effect, second-effect, third-effect)separators and evaporators and pre-heaters,condenser and vacuum pump, feeding pump,circulation pump, discharge pump, condensed water pump, pipeline and fittings, etc. It is equipped with vacuum gauge, thermometer,pressure gauge,and so on.
Characteristic
1. Evaporation rate: 500 kg per hour to 80 tons per hour
2. Stainless steel 304 or 316L as the material; 3. A fully closed
process with rapid evaporation at low temperatures;
4. Since seamless sanitary pipes have a mirror finish inside, it is
difficult to attach materials to them.
5. Low evaporation temperature: A portion of secondary steam can be
inhaled into a single-effect heater by a spray type hot pressure
pump. It is simple to clean. As a result, the heat would be fully
utilized, and the temperature for evaporation is low.
6. Large concentration ratio: adopt falling film evaporation, which
make the material liquid with larger viscosity be easy to flow and
evaporate, hard to scale, short concentration time.
7. This equipment can realize automatic production, intellectual
system management.
8. Can be designed into different technological process according
to the different characteristics of the materials and different
users' requirements.
Application
Multiple Effect Evaporators are widely used in the following areas as per the requirement.
Effluent Treatment: Industries like Chemical, Pharmaceutical, Textile, Dyeing, Breweries, Automobiles, Milk, Food industries etc, generates process effluents which are harmful to the environment. These effluents generally consist of water in huge amount and waste(contaminants). By evaporating the water from the effluent using MEE system results in the recycling of water.
Desalination: Reject of RO (Reverse Osmosis) have a huge amount of water. With MEE the water can be recycled.
Chemical Industry/ Pharma Industry: For the production of product the desired concentration is required or desired material need to be separated. Using MEE system desired concentration is achieved.
Milk Industry: Milk can be concentrated in the MEE system.
Sugar Industry: Sugar cane juice can be concentrated with MEE system.
Food industries: Tomato juice concentration, Sausages, Fruit juice concentration can be done in MEE system.
Advantages: Evaporation can be achieved with low consumption of heat source.
Typical three effect falling film evaporator specifications and technical parameters:
Parameter/ Specifications | HP-3.0 | HP-4.5 | HP-6.0 | HP-9.0 | HP-12.0 | HP-15 | HP-20 | HP-24 | HP-30 | HP-50 | |
Evaporation capacity(kg/hr) | 3000 | 4500 | 6000 | 9000 | 12000 | 15000 | 20000 | 24000 | 30000 | 50000 | |
Consumption of raw steam(kg/hr) | 900 | 1350 | 1800 | 2700 | 3600 | 4500 | 4500 | 7200 | 9000 | 15000 | |
Vacuum degree of each effect | First Effect | 0 | |||||||||
Second Effect | 448 | ||||||||||
| (mmHg) | Third Effect | 640 | |||||||||
Evaporation temperature of each effect | First Effect | 99 | |||||||||
Second Effect | 76 | ||||||||||
Third Effect | 53 | ||||||||||
Steam pressure for evaporation(MPa) | 0.6-1.0(Absolute pressure) | ||||||||||
| Solid content in feed(％) | 6-7(Corn pulp example) | ||||||||||
| Solid content outlet(％) | 42-48(Corn pulp example) | ||||||||||
Our Production Site
Removable Tvr Ball Vacuum Mvr Polluted Water Evaporator For Paper Making Salt Making
Inquiry Cart
0