Add to Cart
For Cement Bag 12 Shuttle Circular Loom Full Automatic Woven Sack
Production Line
Description:
Heavy-duty Circular Loom means circular loom is capable of weaving
the fabrics over 400g/m2. For high strength woven geo-textile
Chinese Standard GB/T17641-1998 lists the specification including
400g/m2 , 460g/m2, 520g/m2, 640g/m2 etc, these fabrics exceeds the
weaving ability of ordinary circular loom, but easy to be woven by
HLW12 due to its heavy-duty property, even 800g/m2 can be woven.
Why low strength loss Low strength loss ,i.e. strength loss less
than 5% during weaving.
1.For current circular loom , strength loss is usually 15% while
weaving fabrics 80-210g/m2, 20% for exceeding the this scope. Thus
for same slit film, fabrics woven by circular loom of low strength
loss will gain 10% higher in strength then those woven by current
circular loom. As such to reach at the same strength, circular loom
of low strength loss will save 10% material (slit film) than
ordinary circular loom does.
2.For circular looms of low strength loss have less scathe to slit
film, compared with those circular loom can only weave fabrics at
55-230g/m2, they possesses wider weaving scope and more
flexibility, and capable of weaving fabrics at 40-800 g/m2.
3.As folded diameter of circular loom increases, warps increase,
too, meanwhile the chances of stop for slit film break also
increase, which lead to flaw and low production, that's why current
ordinary circular loom will be out of run if increasing width and
warps. On the contrary warp break rate is almost zero for circular
looms of low strength loss, that's true for even increasing up to
4000, as such circular loom with over-wide folded diameter can only
be those circular loom of low strength loss.
Specifications:
No.s | Mould | Shuttle Qty.(pcs) | Max.fold width(mm) | Max. Open width(mm) | Warp no.s(pcs) | Speed(RPM) | Main power(KW) |
1 | UWCL-24/16000 | 24 | 8200 | 16400 | 8000 | 5~25 | 37 |
2 | UWCL-20/11000 | 20 | 5500 | 11000 | 5376 | 5~28 | 22 |
3 | UWCL-16/8300 | 16(12) | 4150 | 8300 | 4800 | 5~41 | 18.5 |
4 | UWCL-12/7800 | 12(14) | 3900 | 7800 | 4400 | 5~41 | 18.5 |
5 | UWCL-12/7200 | 12(14) | 3600 | 7200 | 3780 | 5~45 | 18.5 |
6 | UWCL-12/6500 | 12 | 3260 | 6600 | 3620 | 5~51 | 11/15 |
7 | UWCL-12/6000 | 12(10) | 3050 | 6100 | 3200 | 5~51 | 11/15 |
8 | UWCL-12/5400 | 12(10) | 2700 | 5400 | 2880 | 5~64 | 11/15 |
9 | UWCL-10/4800 | 10(8) | 2400 | 4800 | 2880 | 5~64 | 11 |
10 | UWCL-10/4400 | 10(8) | 2200 | 4400 | 2640 | 5~72 | 7.5/11 |
11 | UWCL-8/3500 | 8 | 1750 | 3500 | 1976 | 5~80 | 7.5 |
12 | UWCL-6/3200 | 6(8) | 1600 | 3200 | 1920 | 5~80 | 7.5 |
13 | UWCL-6/2700 | 6 | 1350 | 2700 | 1512 | 5~100 | 7.5 |
Machine Details:
1. How long will your engineer reach our factory?
Within one week after everything ready (machine arrival your
factory, non-woven material, power source, air compressor etc.
Prepared)
2. How many days will you finish installing?
We will finish installation and training within 15 days.
3. What should we charge for your engineer?
You should charge for the cost of our engineer's air tickets,
hotel, food, and also their salary 80USD one day per person.
4. How long is your machine's warranty period?
All our machine has one year guarantee for electricity parts and
two years guarantee for mechanism, starting from finished
installation.
5. How could you do if the parts broken within warranty?
We would express the free replacement parts during the warranty
date
6. How could you do after one year warranty period?
We also can-do service for you, but you need pay salary for our
technicians 80USD/day for each person.