Product Details
2Volt 1000Ah Deep Cycle Gel Battery Solar System UPS Series
Connection
Description
Deep Cycle Gel battery is a battery in which the electrolyte is in
gel state, which belongs to a development classification of
lead-acid battery, the method is to add gelling agent to sulfuric
acid, so that the sulfuric acid electrolyte becomes gel state.
Composition is different: lead-acid battery is mainly composed of
tubular positive electrode plate, negative electrode plate,
electrolyte, partition, battery tank, battery cover, pole column,
liquid injection cover, etc. The internal structure of gel battery
is mainly SiO2 porous mesh structure with a large number of tiny
gaps, which can make the oxygen generated by the positive electrode
of the battery migrate smoothly to the negative electrode plate and
facilitate the absorption of the negative electrode by chemistry.
Model | Nominal Voltage | Capacity C10 | Weight | Dimension |
Height | Length | Width |
V | Ah | kg | mm | mm | mm |
JGFM 100-2 | 2 | 100 | 7.2 | 205 | 172 | 102 |
JGFM 150-2 | 2 | 150 | 9 | 320 | 172 | 102 |
JGFM 200-2 | 2 | 200 | 13 | 329 | 171 | 111 |
JGFM 300-2 | 2 | 300 | 18 | 330 | 171 | 151 |
JGFM 400-2 | 2 | 400 | 25 | 329 | 211 | 176 |
JGFM 500-2 | 2 | 500 | 28 | 331 | 241 | 172 |
JGFM 600-2 | 2 | 600 | 35 | 331 | 301 | 175 |
JGFM 800-2 | 2 | 800 | 48 | 333 | 410 | 175 |
JGFM 1000-2 | 2 | 1000 | 62 | 329 | 470 | 175 |
JGFM 1500-2 | 2 | 1500 | 96 | 343 | 401 | 351 |
JGFM 2000-2 | 2 | 2000 | 123 | 343 | 491 | 351 |
JGFM 3000-2 | 2 | 3000 | 180 | 341 | 712 | 353 |
Product Features
- Product name: Deep Cycle Gel Battery
- Capacity range: 100Ah-3000Ah
- Voltage class: 2V
- Float charge voltage: 2.23V-2.25V
- Equalized charge voltage: 2.35V-2.40V
- Long working life: 10years
- Low self-discharge rate: ≤3%/month
- High sealed reaction efficiency: ≥99%
- Widen operation temperature rang: -30℃~55℃
- Strict manufacturing process to ensure consistent products
- 4BS nucleation technology and high temperature and high humidity
curing process for positive electrode.
Advantages
- Product name: Deep Cycle Gel Battery
- Quick and convenient to use, because the internal resistance,
capacity and floating voltage of the single battery are consistent,
so there is no need for equalization charging and frequent
maintenance.
- Wide range of adaptable environment (temperature), especially good
performance in low temperature, suitable for northern alpine area.
- Small self-discharge, good deep-discharge performance, strong
charge acceptance, small up and down potential difference, large
capacity.
Application
- UPS/EPS systems
- Emergency Lighting Systems
- Warning systems
- Solar, wind power generation and wind and solar complementary
energy storage systems, power systems, nuclear power plants standby
power
Compliant standards
- IEC60896-2-1995
- TD/T 799-2010
- GB/T 19638.2-2005
- GB/T22473-2008
- YD/T1360-2005
- JISC8704-2:1999
- Passed ISO9001.ISO14001, GB/T28001-2001, CE,
- TLC, CGC certificate
Use of Deep Cycle Gel Battery
- Product name: Deep Cycle Gel Battery
- Check before charging and discharging: Before charging and
discharging, the insulation of the charging equipment should be
checked to see if it is good. Specific method: use 500V megohmmeter
to measure the DC charging screen bus not less than 10MΩ.
- Initial replenishment of electricity: Before putting the battery
into use after installation and inspection, it should be balanced
and supplemented with 14.1V balanced charging voltage at 25℃ for a
single battery, and charged in a constant voltage current-limiting
way for the battery pack. The maximum charging current is set to
0.25C10A.
Discharge: 1) 12V battery charging and discharging, 250Ah battery
with a current of no more than 25A for 10 hours to discharge until
the battery termination voltage of 10.8V or more, do not over
discharge.
2) During the discharge process, measure and record the battery
voltage, discharge current and ambient temperature every hour, pay
attention to the change of ammeter and battery voltage at any time,
when the voltage drops to about 12.0V, change to half an hour test.
When the measured voltage is 10.8v, stop discharging, open the
discharge switch, the discharge is over. And record the discharge
termination time, battery voltage, ambient temperature.
3) After discharge, the battery should be recharged in time, to
prevent acidification of the poles, the discharge-charging interval
should not exceed 8 hours, so it must be balanced within 8 hours to
replenish the electricity, the average charging voltage is set to
14.1V (the average of the measured value of the positive and
negative terminals of the battery at 25℃), and the maximum charging
current is set to 0.25C10A. The battery will run normally with the
float charging voltage of 13.5V. Battery 13.5V.
4) After discharge, check the discharge capacity at 25℃, it should
be not less than 85% of the rated capacity, i.e. 12V250AH battery
is not less than 212.5Ah.Temperature compensation: The above current and voltage setting
values are the standard values when the ambient temperature is 25℃,
if the gel battery working temperature is beyond the range of
20℃-30℃, the floating charge and average charge voltage should be
corrected accordingly, the corrected voltage is, that is, for every
1℃ increase in temperature, the floating charge voltage is reduced
by 5.5mV, and for every 1℃ decrease in temperature, the floating
charge voltage is increased by 5.5mV.
Company Profile
Together with our customers and suppliers, we have been partners in
solar battery industry for 12 years and have supplied over 20 kinds
of patent solar systems for home and abroad.
In 2008, we established FairylandSolarTM and won our first solar home system project--“GoldSun” project for
whole Shaanxi province which was a famous big project appointed by
Chinese government. During 3 years installation, we were always
moved a lot when people showed true smile when lighting their home.
They should carry a heavy battery and walk hours home, so
aftersales is so difficult that pushes us to supply high quality
products with long lifetime. We invested gel battery production
line with a 50 staff team who has 20 years production experience
for AGM battery. For the enough good quality and reasonable price,
we becomes a stable supplier for solar projects, OEM for them.
In 2018, as the rapid development of lithium battery, we
established CASISOLARTM that started a team only for packing lithium batteries. During the
past 3years, we found the wide difference between price and
products. As government promotes “ giving retied battery a second
life” , some make a profit in troubled situation, providing retired
cells for solar making great lost in a long term or even has
personal safety hazard.
So in CASISOLAR, we don’t think it is 100% safe to use retired
battery cells. We only accept cells at Great A with 5 years more
warranty. We didn’t grow up quickly but we harvest every customer
we have cooperated. We always enjoy and appreciate troubles met
during every cooperation, and give great enthusiasm and confidence.
Our mission is to provide solar energy at low cost over a long
lifetime.