Compliance with MIL-STD-810H and IEC 60068-2-38 Rapid Testing Cycles Temperature and Humidity Chamber
Brand Name:Envsin
Certification:CE
Model Number:ECS
Minimum Order Quantity:1
Payment Terms:T/T
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen
Address:
139, Yinxing Technology Building, No. 1235, Guangguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Rapid Temperature Change (Humidity)Test Chamber Overview
This test chambe is suitable for high temperature, low temperature, hot-humid and rapid temperature change (ESS) conditions test of the whole machine, parts and materials.
Features
Specifications
Options
☆ APP for mobility management
☆ Independent sensors for specimen protection (NE60519-2.1993)
☆ 1 Entry port Φ100mm Automatic water supply device
☆ Nitrogen gas auxiliary device
☆ Spare parts package
☆ E-management and cyber-software
☆ Video monitor system
Standard Version
☆ 2 Stainless steel shelves
☆ 3 Power outlets for test specimen
☆ 2 Silicon stoppers for entry ports
☆ Left and right entry ports
☆ Drier filter for compressing air
☆ 1 Water tank with 20L for ECS series
☆ 1 Water filter for ECS series
Temperature and Humidity Control Chart
1.Standard Model Well Function Range
2.Standard Model Max. Function Range
3.Enhanced Model humid. Range ( with air drier)
4.Enhanced Model humid. Range ( with air drier and capacitive measuring)
Structure
| 1, Structure Mode | Unitary.Test room is on the top, refrigerator is in the bottom; Power distribution control in the back; Main control panel in the front door, and the extended one is on the right-back side. Door opens from right to left. Air circulation channel and air conditioning system are at the back of test space:(centrifugal fan blade,air flow guiding device,heater,humidifier,Refrigeration heat exchanger,Temp and humidity sensing device. |
| 2, Composition | 2.1 Exterior material: Both sides static coated cold rolled steel 2.2 Interior material: SUS304 Stainless steel 2.3 Insulation material: Rigid polyurethane foam insulation layer |
| 3, Load-bearing | 3.1 Shelves load capacity:≤50Kg(averagely loaded) |
| 3.2 Test case frame bearing capacity:≤20Kg(averagely loaded) | |
| 3.3 Test space total load weight(shelves and bottom)≤80kg | |
| 4, Chamber door | 4.1 Single door with hinges on the left; 4.2 Door size:580×750 mm(W×H); 4.3 Silicon rubber equipped and heating system inside for anti-condensation; |
| 5. Observation window | Size:280×400mm(W×H), coated heating anti frost hollow glass |
| 6. Cable ports | 2 ports with Φ50 mm on left and right sides, with screw caps and Soft silicone plugs. |
| 7. Headlamp | In the observation window |
| 8. Shelves | 2 shelves inside for samples; height adjustable |
| 9. Drain Holes | Condensate water drain holes for condensate water outside |
| 10, Spill Port | Located at the back of case for condensate water discharging |
| 11. Mobile Castors | Strong adjustable wheels |
| 12. Separate Design Of Water/Electricity | Humidity system and electric control system are separated for safety(patent no.:ZL201220245236.8) |
Rapid Temperature Change and Climate Test Chamber...
Compliance with MIL-STD-810H and IEC 60068-2-38 Rapid Testing Cycles Temperature and Humidity Chamber
Inquiry Cart
0