Thermal Shock Chamber with Rapid Transition Technology for Automotive and Electronics
Brand Name:Envsin
Certification:CE
Model Number:ET6200S2
Minimum Order Quantity:1
Delivery Time:30-35 business days
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen
Address:
139, Yinxing Technology Building, No. 1235, Guangguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Faster Change Thermal Shock Test Chamber Rapid Change Chamber
The Thermal shock test chamber suitable for examining the ability of the whole machine, components, parts and other components to withstand sharp changes in temperature. The temperature impact test can understand the impact of the test sample once or repeatedly due to temperature changes. The main parameters affecting the temperature change test are the high and low temperature values in the range of temperature change, the holding time of the sample at high and low temperature, and the number of cycles of the test, etc.
The Thermal shock test chamber is used for testing non-heat dissipation test samples and low heat dissipation test samples. For the test of heat dissipation test samples, the heat dissipation power should not exceed the temperature control cooling capacity of the refrigeration system of the Thermal shock test chamber, otherwise it will affect the temperature conversion speed and capacity of the test chamber. It is recommended that the heat dissipation of the test samples be less than 300W.
Specifications:
Model:Thermal shock test chamber | ET4200S2 |
| ET5200S2 | |
| ET6200S2 | |
| Test Space Volume(L) | 200 |
| Test Zones | 2 |
| Hot Chamber Temp.Range(℃) | +50/+200 |
| Cold Chamber Temp.Range(℃) | -75/+70 |
| Temp. Constancy(℃) | ±0.3-±1.0 |
| Temp.Homogeneity(℃) | ±1.0-±2.0 |
| Recovery Time(min) | <5(on Air Outlet) |
| Test Space Dimension(mm) | 600W*550D*600H |
| External Dimension(mm) | 1200W*2500D*2200H |
Temp. Range(℃) | -40/+150 |
| -55/+150 | |
| -65/+150 | |
| Max. Specimens Weight (kg) | 50 |
| Cooling Methods | Water-Cooled(IEC 60068-3-5) |
| Power | AC380V±10%,50HZ,3/N/PE |
Compliant with International Standards: GB/T2423.22 MIL STD 202F (Method 107G) IEC 60 068-2-14 Test Na BS 2011 DIN 40046,Test Na JESD22-A101-A | |
Structure:
- The upper part is preheating tank (with Thermal shock test chamber door), the lower part is precooling tank, the working room is mobile metal pod between preheating tank and precooling tank,the rear part is electric control cabinet and refrigeration unit, and the main control interface is located in front of the test chamber door. The gate is opened in the width direction, and each slot area is equipped with independent circulating air duct system: wind motor, centrifugal
The structural strength:
- Bearing capacity of Thermal shock test chamber bottom plate: ≤40kg (uniform load)
- Thermal shock test chamber sample frame bearing capacity: ≤20Kg (uniform load)
- The total weight of the Thermal shock test chamber (bottom plate and sample rack) shall not exceed 50kg
The chamber door:
- Single hinged door, hinged on the left side of the test chamber (facing the test chamber)
- Door size: 650×410 mm (WIDTH × height), door frame two silicone rubber sealing strip and anti-condensation electric heating device
Thermal Shock Chamber with Rapid Transition Technology for Automotive and Electronics
Inquiry Cart
0