Product Details
8m³ Environmental Test Chamber Water-Cooled Walk In Environmental
Test Room
Designed for high and low temperature test and rapid temperature
change ESS test for whole product, machine component, and
materials.
This machine can test samples of or not of thermal dispersion. For
samples of thermal dispersion, the thermal dispersion power should
be no more than the refrigerating power of the test chamber. The
thermal conditioning process is dynamic, and the refrigerating
power varies in different temperature. Therefore if the samples are
of easy thermal dispersion, please refer to the load thermal
capacity graph blow for a correct test performance.
Properties:
Test Space | 8m³ |
Internal size | 2000W×2000D×2056H (mm) |
External size | 2240Wx2240Dx3800H (mm) |
External size | |
Power supply | AC230V/400V,50Hz±1, 60A, 3/N/PE, earth resistance < 4Ω |
Max. Power | 33KW |
Max. Currency | 60A |
Cooling Method | Water-Cooled(Cooling system) |
Installation Site | - Installation ground is flat, of good ventilation; no flammable
article, corrosive gas or dust
- No strong EMR source nearby
- Close to drainage system ( within 2 meters for condensate water)
- The chamber should be installed on a flat floor, the load of the
surface is more than 10000kg/m2
- Prepare proper power supply and water supply
- Prepare gas if it is needed
- Ambient Temp: 5℃~25℃suggested, 25℃~35℃ function normally (for
air-cooled model);5℃~40℃ function normally (for water-cooled model)
- Ambient Humid:≤85%RH
- Ambient Pressure:86KPa~106KPa
- Installation space assurances, as following
|
Specifications:
Temp.&Humid. Parm. | Temp. Range:-40℃~+100℃ |
Note:
1.Test with no load, meeting GB/T5170-2008, if no other special
notice.
2.Ambient Temp 25℃, good ventilation condition: function well if
35℃≥RT>25℃;Cool down rate and thermal load capacity will be
affected by ambient low temperature.
3.Water-cooled water temp ≤28℃, water pressure is 0.3MPa~0.6Mpa,
water pressure difference is ≥0.2Mpa. |
Temp. Uniformity:±0.5℃~±2.0℃ |
Temp Deviation:±0.1℃~±2.0℃ |
Temp Fluctuation:±0.1℃~±0.5℃ |
Temp Gradient:<2.0℃ |
Heat up Rate:4K/min |
Cool down Rate:4K/min |
Climate Test
| Temp. Range:+10℃~+95℃ |
Humid. Range: 10%RH~98%RH |
Humid. Fluctuation: ±1.0℃~±3.0℃ |
Temp. Uniformity: ±0.5℃~±2.0℃ |
Humid. Uniformity: ±1.0%RH~±5.0%RH |
Temp. Deviation: ±0.1℃~±2.0℃ |
Humid. Deviation: ±1.0%RH~±5.0%RH |
Temp. Fluctuation: ±0.1℃~±0.5℃ |
Humid.Fluctuation:±1.0%RH~±3.0%RH |
Temp. Gradient: <2.0℃ |
Humid. Gradient: <5.0%RH |
Test Standards | 1. GB/T 2423.1 Low Temp. Test Method 2. GB/T 2423.2 High Temp. Test Method 3. GB/T2423.34 Temp. and Humid Cycling Test Method 4. IEC60068-2 Temp. and Humid Test Method 5. GJB 150.3 High Temp. Test Method 6. GJB 150.4 Low Temp. Test Method 7. GJB 150.9 Temp. and Humid Cycling Test Method 8. MIL-STD-202G-103B Humid. Test Method |
Load thermal capacity graph (calorific value of specimen) | In temperature test, the thermal capacity for loading varies from
different temperature value. |
Temperature and Humidity Control Chart | |
Factory Overview:
Envsin Instrument Equipment Co., Ltd is one leading manufacturer
and supplier in China for environmental chamber and climatic
chamber.
Envsin has won more than 67 patents,24 software
copyright,ISO9001:2008 and ISO 14001:2004 are certified.
Envsin equipment are widely used with the Aviation,Aerospace ,Boat
and Ship,Military,Rail Transit,Medical,Communication,New Energy,
Plateau,Civil
Electrical,Military,Electronics,Package,Automotive,Military
Vehicles,Instrument,Fire Equipment.Envsin products include: Temperature Humidity Chamber,Thermal Shock
Chamber,Industrial Oven,Aging Test Chamber,Corrosion
Test Chamber,Mechanical Tester.
During past years, we are honored to be the preferential vendor to
many famous entities such as Foxconn, Apple,CISCO,SAMSUNG.With 18
service centers in 16 countries,envsin is qualified to provide you competitive test
solutions and services.
Company Profile
For over 20 years, Envsin has been a trusted provider of
environmental simulation and reliability testing solutions. We’ve
served more than 170 Fortune 500 companies and over 1,000 small and
medium-sized enterprises across 37 countries worldwide. Our
expertise spans the development and production of standard and
custom testing chambers, including constant temperature and
humidity chambers, high and low temperature chambers, thermal shock
chambers, aging chambers, and large-scale walk-in chambers. We also
specialize in complex environmental testing chambers for salt
spray, dust, water resistance, rain, light exposure, pressure, and
more.
Guided by the principles of dedication, professionalism,
innovation, and excellence, Envsin is committed to creating a
sustainable future through advanced testing solutions. Our team is
focused on becoming a global leader in the industry, advancing
technological progress, and consistently contributing to the
development of the instrument testing sector.