Synmot 1kHz Universal Servo Drive For Permanent Magent Synchronous Motor
Brand Name:ZK
Certification:CE IEC
Model Number:AS850Z(T)-4T18.5GB
Minimum Order Quantity:1 unit
Delivery Time:4-8days
Payment Terms:T/T, L/C, Western Union
Contact Now
Add to Cart
Active Member
Address:
Room 617, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Synmot AC 380V Servo Drive For PMSM Of Injection Molding Machine
ZK AS850 series Servo Drive for Permanent Magent Synchronous Motor (PMSM):
High Positioning Accuracy
AS850 series servo motors feature incremental encoders with 20-bit
level resolution which can improve low speed stability, smooth
motor operation and enhance the accuracy of positioning.
Absolute type encoder with 17-bit level resolution is supported.
High Responsiveness
Up to 1 kHz frequency response.
Settling time below 1 ms.
7 ms acceleration time for speeds from -3000 r/min to 3000 r/min
with an empty load!
(Note: The test record is of a 400 W motor with 60 mm frame size).
Output frequency range: 0 to 400Hz.
Input voltage: 3 phase 380V±15%, 2.2kw to 90kw
Pressure signal reference: external analog 0-10V, 0-1A.
Protection function: Input phase missing, input under voltage, over voltage, over current, over load, over heat, external disturbing .
Cooling method: force cooling
Mount: Wall mount
Function features
Energy saving: up to 60% energy saving compare to traditional fixed pump system. 75% is possible be achieved according to difference injection condition.
Lower oil temperature: reduce 5-10 degrees
High repeated accuracy: To achieve high accuracy flow and pressure control
Long pressure holding time: It is favorable for big wall thickness.
Quick response: frequency response up to 50ms.
Input voltage: 3 phase 380V±15%, 2.2kw to 90kw
Pressure signal reference: external analog 0-10V, 0-1A.
Protection function: Input phase missing, input under voltage, over voltage, over current, over load, over heat, external disturbing .
Cooling method: force cooling
Mount: Wall mount
Function features
Energy saving: up to 60% energy saving compare to traditional fixed pump system. 75% is possible be achieved according to difference injection condition.
Lower oil temperature: reduce 5-10 degrees
High repeated accuracy: To achieve high accuracy flow and pressure control
Long pressure holding time: It is favorable for big wall thickness.
Quick response: frequency response up to 50ms.
Model number list and specifications:
| Servo drive model | Input voltage | Rated output power (KW) | rated input power (A) | Rated output current (A) | braking resistor power selecting | braking resistor (Ω) | Braking unit |
| AS850Z4T017 | 3 phase 380V | 7.5 | 20.5 | 17 | 1000 | >90 | built in |
| AS850Z4T025 | 11 | 26 | 25 | 1000 | >40 | ||
| AS850Z4T032 | 15 | 35 | 32 | 1000 | >32 | ||
| AS850Z4T037 | 18.5 | 38.5 | 37 | 2500 | >32 | ||
| AS850Z4T45 | 22 | 46.5 | 45 | 2500 | >16 | external connect | |
| AS850Z4T60 | 30 | 62 | 60 | 2500 | >16 | ||
| AS850Z4T75 | 37 | 76 | 75 | 5000 | >8 | ||
| AS850Z4T91 | 45 | 92 | 91 | 5000 | >8 | ||
| AS850Z4T112 | 55 | 113 | 110 | 5000 | >8 | ||
| AS850Z4T150 | 75 | 157 | 150 | 5000 | >8 | ||
| AS850Z4T175 | 93 | 180 | 175 | 5000*2 | >8*2 | ||
| AS850Z4T210 | 110 | 214 | 210 | 5000*2 | >8*2 | ||
| AS850Z4T250 | 132 | 256 | 250 | 5000*2 | >8*2 | ||
| AS850Z4T300 | 160 | 307 | 300 | 5000*2 | >8*2 |
Advantage:
The injection molding machine power consume take up 75% of system
total in traditional constant flow of IMM.
It need difference flow and pressure during difference working stage of IMM such as mold close, injection, pressure holding, molding open. When the required over the setting pressure and flow, the flow and pressure will be adjusted by relief valve or proportional valve. this process call high pressure throttling. Up to 40-75% energy wasting during this stage.
It need difference flow and pressure during difference working stage of IMM such as mold close, injection, pressure holding, molding open. When the required over the setting pressure and flow, the flow and pressure will be adjusted by relief valve or proportional valve. this process call high pressure throttling. Up to 40-75% energy wasting during this stage.
Application:
1. Injection molding machine
2. pressure die casting machine
3 . brick machine
4. shoes machinery
5. Pressing machine
6. Aluminum extrusion machine
7. Hydraulic, CNC punching machine
8. Civil engineering machine
9. Other hydraulic machinery
Synmot 1kHz Universal Servo Drive For Permanent Magent Synchronous Motor
Inquiry Cart
0