Automatic Reset Normally Close Normal Opened BW Series Motor Thermal Protector 170C 175C 180C 185C 190C 195C

The Parameters

Principle and characteristics

The BW-type thermal protector is made up of a disk-shaped and high sensitive bimetallic element, a traveling contact, a statics contact, a ledger plate,a shell,heat-resistant wires etc. When the protector works,the bimetallic element is free and unlocked , the traveling contact and the statics contact closes,the main circuit is in conducting state.If the protector gives out heat for some reason, the temperature will rise up and as if it gets to the rating action temperature,the bimetalic element will react rapidly because of the inner stress for the heat,which can promote the traveling contact so as to disconnect the contact and cut off the power supply to have a protective effect. When the temperature drops to the rating reset temperature,the bimetallic element returns to the initial state, the traveling contacts close,the protector recovers to work and loops in this way. The product has the advantages:very little resistance,temperature-sensing,acted quicky,Safe and reliable,small, light etc.

Model Number Explain

BW-A: The metals outer shell type product.

BW-B: The plastics outer shell type product.
The metals outer shell type the product outer shell take an electricity, should add to insulate a coat.

Technical Parmeters

Application
This porduct is widely used in washing machine motor,air conditioner motor,dry washer motor,water pump motor,the electronic ballast,voltage transformer,electric tools,microwave oven motor, Ventilator motor,electronic component,electric heating electric appliance etc.

Test Method

Sample is connected to the fixture of the equipment,and placed into the test equipment (Hot current of air in the space of test should be equipped with a stirrer and temperature is controllable).A detect current about 10mA(no more than 100mA)is passed through the sample and a thermometer is placed junction to the sample to monitor the opening temperature .The temperature of the test equipment is raised at the rate of 0.5~1℃ per minute until the sample functioned.

More Related Products