1000V DC 10 x 38mm Fusible CE UL 4A gG gPV Cartridge Fuse for Solar Panel and Solar Controller

1000V DC 10 x 38mm Fusible CE UL 4A gG gPV Cartridge Fuse for Solar Panel and Solar Controller

Description

Features

• 1000Vdc Fuse for Solar Panel Applications
• 10x38mm physical size with leads
• Designed to UL 2579
• Capable of interrupting low overcurrents associated with faulted
• Lead Free and Halogen free material

• DC Cold Resistance are measured at <10% of rated current in ambient temperature of 25℃
• Typical Pre‐arching I2t are measured at 10In Current
• Min Interrupting Rating: 1.35 x In
• Fuse Coordination w/: Thin film cells and 4”, 5” and 6” crystalline silicon cells.

Dimension & Structure

Recommended installation

Operating Temperature: -55℃ to +125℃ (Consider de-rating)

Stored condition: at temperature of +10℃~60℃, relative humidity ≤ 75%.

Recommended Soldering Parameters: Soldering pot temperature: 260℃ Max; Solder dwell time: 2∼5s

Resistance to Soldering Heat: 260℃, 10s. (Wave); 350℃, 5s. (Soldering iron)

Solderability: 260℃, ≤ 3s. (Wave); 350±10℃, ≤ 3s. (Soldering iron)

Lead Pull Strength: 5N for 10±1 Seconds

Lead Thrust Strength :2N for 10±1 Seconds

Standard Package

100pcs per bag, 1000pcs per box, 4000pcs per carton

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.

• Company warehouse

• Founded in 1999, we have been focused on manufacturing over-current, over-temperature and other circuit protection components.
• Our main products include fuses, fuse holders, thermal switches, circuit breakers and temperature sensors, which are widely used in various kinds of electronic devices, such as consumer electronics, mobile terminals, household appliances, lighting appliances, power supplies, adapters, automobile and marine applications. We have acquired ISO9001/UL/cUL/VDE/CCC/CQC safety certificates.
• After serving our valuable clients in China market over 20 years, we have become one of the leading suppliers of circuit protection components.
  

1999 REOMAX Electronics(HK) was founded.

2003 REOMAX factory was founded

2007 IS0 9001 approved

2009 Name changed to Dongguan Reomax

2011 CQC、CCC、UL、cUL and VDE were certified.

2011 Member of CEEIA

2012 VDE certified

2012 Fuse patents were acquired

2013 PSE and KC approved

2014 REOMAX trademark applied

2014 1206/0603/2410/6125 fuses were developed

2015 Fully automatic machines were put into production。

2016 Testing machines were improved

2017 High voltage and high current testing machines were put into use. XR inscpention euqippemnt was brought in.

2018 6125 1808 2410 were certified by CQC and KC

2019 6125 was certified by VDE

2019 1032 and 1245 were certified by UL

2020 Square fuses of high current and high voltage were certified by TUV.