Copper Anodizing Brass Worm Gear For Heavy Duty Equipment

Copper Anodizing Small modulus worm gear parts for heavy duty equipment

Description

Worm gear is a kind of gear which has one or several spiral teeth and is meshed with worm gear to form staggered shaft gear pair.
This product is made of brass, which is used in automotive parts.

Worm gear process:

1. Rough turning, semi finishing turning and finishing turning are the most important process route for common materials.

2. Rough turning semi finishing turning rough grinding fine grinding. For ferrous materials, when the requirements of high precision and small surface roughness value and parts need to be hardened, the subsequent process can only be grinding.

3. Rough turning semi finish turning finish turning diamond turning, for non-ferrous metals, it is not easy to obtain the required surface roughness by grinding, because non-ferrous metals are generally soft and easy to block the gap between sand grains, so the final process mostly uses finish turning and diamond turning.

4. Roughing semi finishing roughing finishing finishing finishing. For the hardened parts of ferrous materials, the requirements of high precision and small surface roughness are often used.

The oxidation treatment of metal is to form a protective oxide film on the metal surface with oxygen or oxidant to prevent metal corrosion. Oxidation methods include thermal oxidation, alkaline oxidation, acid oxidation (ferrous metals), chemical oxidation, anodic oxidation (non-ferrous metals), and so on.
1) Chemical oxidation method The chemical oxidation method is mainly suitable for the oxidation treatment of non-ferrous metals (such as aluminum, copper, magnesium and their alloys). The treatment method is to put the parts in a prepared solution, and after a certain time of oxidation reaction at a certain temperature, a protective film is formed, and then cleaning and drying can be performed.
2) During alkaline oxidation treatment, the parts are immersed in the prepared solution and heated to 135℃～155℃. The treatment time depends on the level of carbon content in the parts. After the metal parts are oxidized, rinse them with 15g/L～20g/L soapy water at 60℃～80℃ for 2min～5min, then rinse them with cold water and hot water and blow dry or dry them. 5min～10min (temperature is 80℃～90℃).
3) The acid oxidation method is to place the parts in an acid solution for processing. Compared with the alkaline oxidation method, the acid oxidation method is more economical. The corrosion resistance and mechanical strength of the protective film formed on the metal surface after the treatment exceed the performance of the film formed after the alkaline oxidation treatment, so it is widely used.

Factory Display

Plating line

1.Q:How do I pay for my purchase order?

A: T/T,Western Union,Escrow,Paypal,Alipay.

2.Q:Can I have my own order customized products?

A:Answer: YES,we accept customized.

3.Q:Do you have quality control?

A::Yes,we attach great importance to quality problem accurs.We have professional engineer to test the cnc lathe machine quality before delivery.

Jiaxing Dexun Co., Ltd. was established in 1997, origin from Taiwan, We are professional manufacturer and have 23 years experience integrated with design, research & development, manufacturing and sales of OEM/ODM CNC machining parts and Oil plug parts.

Our advantages are as follows:

* Located in jiaxing city, only about 1 hour's drive to port cities such as Shanghai and Ningbo.

* 2 International approvals, ISO9001&IATF16949 certificated enterprise.

* 20years of CNC machining and oil plug parts.

* 2 labs of quality inspection.

* 4 Powder coating & Painting lines.

* 32 special technicians ans 14 senior engineers. 15 people professional R&D team.
* 20 CNC machining centers, 98 CNC lathes.

* multistage cold former , 68 production lines

* 150-200 employees.

* 20 inspection instruments.

* 100,00,000 pieces monthly production capacity.

* 35countries export.

* supplying products to GM, BMW, Mercedes-Benz,,Porsche,Tesla, Motors,etc.