Customized High Strength Flange Welding Nut M8 Hot Dip Galvanized

Customized high-strength M8 hot-dip galvanized flange welding nut.

Description

Welding nut is the material (same or different) of the workpiece to be welded. It is by heating or pressurizing or both, and with or without filling material, the material of the workpiece can reach the atomic construction and form a permanent connection.

Hot-dip galvanizing is to make the molten metal react with the iron matrix to produce an alloy layer, so that the matrix and the coating are combined. Hot-dip galvanizing is to first pickle steel parts. In order to remove iron oxide on the surface of steel parts, after pickling, it is cleaned in a tank with ammonium chloride or zinc chloride aqueous solution or a mixed aqueous solution of ammonium chloride and zinc chloride , And then sent to the hot dip plating tank. Hot-dip galvanizing has the advantages of uniform coating, strong adhesion and long service life.

Advantage
1. The entire surface of the steel is protected. The molten zinc can be easily and evenly covered regardless of the inside of the pipe fitting in the depression or any other corners where the coating is difficult to enter.

2. The hardness value of the galvanized layer is larger than that of the steel. The uppermost Eta layer has only 70 DPN hardness, so it is easy to be dented by collision, but the lower Zeta layer and delta layer have 179 and 211 DPN hardness values ​​respectively, which are higher than the 159 DPN hardness value of iron materials, so its impact resistance and The abrasion resistance is quite good.

3. In the corner area, the zinc layer is often thicker than other places, and has good toughness and abrasion resistance. The other coatings are often the thinnest and most difficult to apply at these corners, and the most vulnerable, so they often need to be maintained.

Factory Display

Package picture display

Heat Treatment Room display

Inspection Equipment

A: Generally it is 10-15 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.

3.Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

4.Q: What is your terms of payment ?

A: 30% T/T in advance ,balance before shippment or L/C.

About us

Jiaxing Dexun Co., Ltd. was established in 1997, origin from Taiwan, we are professional manufacturer and exporter integrated with design, research & development, manufacturing and sales of OEM/ODM stamping parts,deep drawing parts, standard welding fasteners and non-standard welding fasteners.

* Located in jiaxing city, only about 1 hour's drive from Shanghai, Hangzhou, Ningbo, Suzhou, these important cities, the transportation is very convenient.

* 2 mature mould development workshops with advanced equipment to develop mould for customers.

* 2 International approvals,Verify & certificate in accordance with ISO9001,IATF16949, work with SGS, operate the PPAP Level 3.

* 2 labs of quality inspection,Control products quality strictly; equipped with various quality testing machines including direct-reading spectrometers, tensile testing machines, CMM machine, X-ray flaw detection instrument.

* 2 quenching and tempering heat treatment lines.

* 2 automatic welding lines.

* 4 Powder coating & Painting lines, Plating lines

* 42 people professional R&D team : 30 special technicians and 12 senior engineers.

* 20 years’experience on manufacturering OEM/ODM products

* 100 sets of automatic production machines: Have 10 sets of automatic stamping & deep drawing equipments, 50 cold forming machines; 40 tooth grinding machines ,equipped with Japan, Germany,etc imported machines.

* 175 employees

* 10 millions monthly production capacity

* 35 countries exported to

* Supplying products to GM,John deere,Wal-Mart，etc

* Implement environment protection concept; strictly operate the facilities and processes under environmental requirements.

We use advanced equipment to improve cost and quality at the same time to make sure lowest price and best quality for customers. We have quality control experts & engineers to test every piece product before shipment. We keep on studying to provide professional service.

Our Mission & Vision

We always work hard to be an environment protection model enterprise. We strive for sustainable development. We hope to be a win-win partner of our customers all over the world.

Environment protection mission:

A full series of environment policies are applied to our every manufacturing activities. Firstly, to propagandize environment protection policy to make sure environment-friendly concept is everywhere in our company.
Every new staff will have environment protection training class. All staffs have environment protection knowledge and policy lecture every month. All the operation manual will marked out environment protection requirements.
Secondly, to establish environment protection responsibility policy.
Thirdly, to have basic environment protection management.
Step 1: Have environment monitor every time.
Step 2: Manage the pollutant treatment equipment efficiently.
Step 3: Establish permit system of pollutant discharge.
Step 4: Establish legal audit system.
Fourthly, to build up emergency rescue system.