2040C Trigonal Pink Sapphire And Diamond Ring Sapphire Stone Ring

2040C Trigonal Pink Sapphire And Diamond Ring Sapphire Stone Ring

Introduction

Sapphire, which is derived from the Latin Spphins, which means blue; it belongs to the corundum group of minerals in the trigonal crystal system. In the gem world, all colors of gem-grade corundum other than rubies are called sapphires.

The main component of sapphire is alumina (Al2O3). Corundum contains trace elements such as iron (Fe) and titanium (Ti), and presents colors such as blue, sky blue, and light blue, among which the bright sky blue is the best.

Basic characteristics

Sapphire single crystal is a simple coordination type oxide crystal, which is anisotropic and belongs to the hexagonal crystal system. The lattice parameters a=b=0.4758nm, c=1.299 1 nm, α=β=90°, γ=120 °.

The light transmittance range of sapphire single crystal is 0.14-6.0μm, covering vacuum ultraviolet, visible, near-infrared to mid-infrared band, and has high optical transmittance in the 3-5μm band; it has high hardness (second only to diamond) , Mechanical and thermal properties of high strength, high thermal conductivity, high thermal shock resistance quality factor; stable chemical properties resistant to corrosion such as rain, sand, and salt spray; high surface smoothness, high resistivity and high dielectric properties .

These excellent optical, mechanical, thermal, chemical and electrical properties determine its important position and role in the military and civilian fields.

Synthesis experiments with rubies and sapphires began in the 1860s, but it was not until the early 20th century, when the Werner Leaf Furnace was born, that synthetic rubies were successful. Synthetic sapphire is crystallized from the melt, its main components are Al2O3, in the synthesis of the addition of trace amounts of Cr, then red, that is, synthetic ruby; If you add a trace amount of Ti, you become a synthetic sapphire.

Synthetic rubies and sapphires are very similar in appearance and nature to natural sapphires, so it is difficult to distinguish them. Now mainly according to the sample internal package differences for identification, such as synthetic ruby often contains bubbles, fine arc lines and so on. If the package is small, these phenomena may not be observed with a magnifying glass, and an optical microscope is needed to observe the energy-picking resolution.

Oval cutting is the most common way of cutting gemstones. The gems cut by the oval cutting method, viewed from above, have soft lines and can compete with diamonds in gloss, and have a strong fire color.

The best number of facets for round diamond cutting is 57 or 58, which is also the most ideal diamond cutting method. Now it is widely used, and many colored gems also use this type of cutting method. The round diamond-shaped cut makes the gem show the most shining fire color, so that the fire color is concentrated on the gem, which is particularly eye-catching.

Why US?

1. We’re the rare source manufacturer of color sapphire boule, and the most professional factory of sapphire processing, especially the special watch case.

2. We have our own sapphire grown equipent with CZ and KY method.

3. Professional customized production according to the drawing provided by clients.

4. Precision work of sapphire processing and polishing.

5. Experienced technicians and skilled workers.

FQA

1. Are you a trading company or factory?

We are a professional factory of sapphire products, also a trading company .

2.Can you do customized products?

Yes, we specialized in customized production or OEM work.

CAD,3D drawing are needed.

3.Could you provide samples?

Yes, we could provide samples with a charge, but if you place the order with a quality above 100pcs, the sample charge will be refunded.

4.What’s the delivery time?

It depends on the type of products and the quality.

For watch case, the regular time is around 5-8 weeks for 200pcs according to the difficulty of the processing.

5.How about the payment?

T/T payment is prefered.

6.How about the delivery?

Mostly by air, like DHL, Fedex.

ARH Sapphire Co., Ltd is a company engaged in optoelectronic materials, new crystal materials,especially all kinds of sapphrie products,which are widely used in consumer electronics, precision equipment, laser communications, medical, environmental protection, high-end instruments, instrumentation, aerospace, naval ships, weapons and equipment. The most advantage product is our sapphire watch cases, which need percisely processing work.

The company has the raw material orientation, cutting, shaping, grinding, chamfering, carved, fine grinding, polishing, cleaning, and a full set of inspection equipment, as well as related testing equipment. With experienced engineering and technical team, With strong production capacity of non-calibration products, we can research, develop and design solutions according to customer needs.

The company's products cover a wide range of types, products are sold all over the world. Adhering to the concept of "customer-centered, employee-based, R&D as the core", the company has a goal to become the best supplier of sapphire.