AISI 304 310S 410 Stainless Steel Sheet 3.0mm BA HL 2b Plate
410 Stainless Steel Sheet
410 stainless steel sheet belongs to the family of martensitic
stainless steels.
410 stainless steel sheet is a general purpose martensitic
stainless steel with 12% chromium content, which can be thermally
treated to obtain a wide range of mechanical properties.
410 stainless steel can be hardened by quenching and tempering.
410 stainless steel sheet has hardness and strength with high
resistance combined with good corrosion resistance.
410 is the most widely used of the martensitic family and is
similar to 4130 except that it is more corrosion resistant.
Alloy stainless steel 410 is malleable and ductile.
It is magnetic in all conditions.
Hairline (HL)
This is one of the classics for stainless steel: hairline finish
has long, continuous and uni-directional grind marks parallel to
the longitude of the panel.
By using specialized grinding technique, the grain size can be
adjusted, as exemplified by defined hairline (D-HL) and scratch
hairline (scratch HL).
As a guideline, the quality of the finish is equivalent to that
applied by the material provider.
This finish is suitable for both interior and exterior products, as
well as panels, ornaments and perimeters.
What is stainless steel BA?
BA (Bright annealed), is a specific surface finish which is
produces by the mills for cold-rolled stainless steels, mainly for
the grades AISI 304 and AISI 316 and in thicknesses up to a maximum
of 3.0 mm.
During its production, the stainless steel is annealed in an inert
gas atmosphere after cold rolling.
This produces a reflective, shiny, smooth surface structure which,
depending on the manufacturer and batch, can be close to a
mirror-polished stainless steel of the lower quality grades.
However, stainless steel mills do not give any guarantees,
standards or tolerances on the finish of the BA and the quality of
the surface or its gloss and reflection can vary greatly from
production batch to production batch.
Chemical Composition:
Chemical composition |
Grade | C | Si | Mn | Cr | Ni |
304 | ≤0.07 | ≤1.00 | ≤2.0 | 18.00~20.00 | 8.00~10.50 |
304L | ≤0.030 | ≤1.00 | ≤2.0 | 18.00~20.00 | 9.00~13.00 |
310S | ≤0.08 | ≤1.00 | ≤2.0 | 24.00~26.00 | 19.00~22.00 |
316 | ≤0.08 | ≤1.00 | ≤2.0 | 16.00~18.00 | 10.00~14.00 |
316L | ≤0.03 | ≤1.00 | ≤2.0 | 16.00~18.00 | 12.00~15.00 |
321 | ≤0.08 | ≤1.00 | ≤2.0 | 17.00~19.00 | 9.00~13.00 |
904L | ≤0.02 | ≤1.00 | ≤2.0 | 19.00~23.00 | 23.00~28.00 |
2205 | ≤0.03 | ≤1.00 | ≤2.0 | 22.00~23.00 | 4.5~6.5 |
2507 | ≤0.03 | ≤0.08 | ≤1.20 | 24.00~26.00 | 6.00~8.00 |
Stainless steel plates are widely used in below fields:
1.Beams, columns, platforms and supports in water treatment
processing plants, pulp and paper manufacture,
nuclear, biomass, chemical, pharmaceutical as well as the food and
beverage industries.
2.Primary beams and columns, pins, barriers, railings, cable
sheathing and expansion joints in bridges.
3.Seawalls, piers and other coastal structures.
4.Reinforcing bar in concrete structures.
5.Curtain walling, roofing, canopies, tunnel lining.
6.Support systems for curtain walling, masonry, tunnel lining, etc.
7.Security barriers, hand railings, street furniture.
8.Fasteners and anchoring systems in wood, stone, masonry or rock.
9.Structural members and fasteners in swimming pool buildings
(special precautions should be taken in structural
components in swimming pool atmospheres due to the risk of stress
corrosion cracking).
10.Explosion and impact resistant structures such as security
walls, gates or bollards.
11.Fire and explosion-resistant walls, cable ladders and walkways
on offshore platforms.
Packaging: According to customers' needs, use wrapping paper.
If the transportation period exceeds 10 days or encounters special
climate, we will use waterproof packaging and add plastic film to
prevent moisture, water and rust.
Loading: We use the wooden pallet,triangular wood to fix the coil,and the
steel wire rope to hold on the both side. That can prevent from the
crush injury effectively.
Competitive Advantage:
1) Professional manufacturer of steel products with strong
technical strength and particular management mode.
2) Standard products can be ordered. A strong production capacity
and a large inventory guarantee the quick delivery
3) Excellent business philosophy: Credit First, Be Honesty, Mutual
Benefit and Customer Supremacy.
4) Effective and continuing function of quality system, perfect
service and most favorable prices.
5) Experienced and trained staff: we have strong ability to help
you ensuring your requirements are tailor made to your complete
satisfaction.
FAQ
Q: Are you trading company or manufacturer ?
A: We are a very professional a trade company for steel products.we
can also provide a wide range of steel products.
Q: Will you delivery the goods on time?
A: Yes,we promise to provide best quality products and delivery on
time .Honesty is our company's tenet.
Q: Do you provide samples ? is it free or extra ?
A: The sample could can provide for customer with free,but the
courier freight will be covered by customer account.
Q: Do you accept the third party inspection?
A: Yes absolutely we accept.
Q: How could you guarantee your products?
A: We could issue the warranty to customer to guarantee the
quality.
Q: How can I get your quotation as soon as possible?
A: The email will be checked within 24 hours,meanwhile,the
Skype,Wechat and WhatsApp will be online in 24 hours.Please send us
your requirement and order information,specification(Steel
grade,size,quantity,destination port),we will work out a best price
soon.
If you have any question, please feel free to contact us any time.