ST7701S Round LCD Display Module
Brand Name:hainengzhichuang
Model Number:custom
Minimum Order Quantity:custom
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:Shenzhen, China
Price:Negotiable
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
ROOM 201,A1 BUILDING,JINCHI INNOVATION PARK,FUYUAN 2ND ROAD,BAO'AN DISTRICT,SHENZHEN
Supplier`s last login times:
within 13 hours
Product Details
Company Profile
Product Details
LCD MODULE
General Specifications
| Feature | Specifications | |
Display Spec. | LCD type | 2.1 inch |
| Resolution (H*V) | 480(RGB)×480 | |
| Technology Type | a-Si TFT | |
| Pixel Configuration | R.G.B. Vertical Stripe | |
| Display Mode | Normally Black | |
| Viewing Direction | ALL | |
| Gray Scale Inversion Direction | - | |
Mechanical Characteristics | OutlineDimensions (W x H x T) (mm) | 56.18*59.71*2.3 |
| Active Area(mm) | 53.28*53.28 | |
| CTP View Area(mm) | / | |
| With /Without Touch screen | Without | |
| Connector Type | 0.5 PITCH 40PIN | |
| Backlight Type | LED | |
| Weight (g) | TBD | |
Electrical Characteristics | Display Interface | 3SPI+18RGB |
| Number of color | 262K | |
| Display Driver IC | ST7701S | |
| Touch Driver IC | / | |
Pin Assignment
| 1 | LED A | LED ANODE |
| 2 | LED K | LED CATHODE |
| 3 | LED K | LED CATHODE |
| 4 | GND | Ground |
| 5 | VCI | Power supply |
| 6 | RESET | Reset Signal ,Active Low |
| 7 | NC | NC |
| 8 | NC | NC |
| 9 | SDA | SPI Data signal |
| 10 | SCK | SPI Clock signal |
| 11 | CS | SPI Chip select signal |
| 12 | PCLK | RGB dot clock signal |
| 13 | DE | RGB data enable signal |
| 14 | VSYNC | RGB frame synchronizing signal |
| 15 | HSYNC | RGB line synchronizing signal |
| 16~33 | DB0~DB17 | RGB data signal(DB0:BlUE LSB;DB5:BIUE MSB;DB6:GREEN LSB;DB11:GREEN,MSB;DB12:RED LSB;DB17:RED MSB) |
| 34 | GND | Ground |
| 35 | TP_INT | Touch Interrupt |
| 36 | TP_SDA | Touch IIC Data signal |
| 37 | TP_SCL | Touch IIC Clock signal |
| 38 | TP_RESET | Touch Reset Signal |
| 39 | TP_VCI | Touch Power supply |
| 40 | GND | Ground |
Absolute Maximum Ratings
| Item | Symbol | Value | Unit |
| Power supply voltage for logic | VDD | 0.3~4.8 | V |
| Input voltage | Vin | VDD+0.3 | V |
| Operating temperature | Topr | -20 to 70 | °C |
| Storage temperature | Tstg | -30 to 80 | °C |
Note:
Note1: Absolute maximum rating is the limit value beyond which the IC maybe broken.
They do not assure operations.
Note2: Background color changes slightly depending on ambient temperature.
This Phenomenon is reversible.
Ta≦70℃: 75%RH max
Ta>70℃: absolute humidity must be lower than the humidity of 75%RH at 70℃
Note3: Ta at -30℃ will be <48hrs, at 80 ℃ will be <120hrs
Electrical Characteristics
1) Driving TFT LCD Panel
| Item | Symbol | Min | Type | Max | Unit | Test condition |
| Operating voltage | VDD | 2.5 | 2.8 | 4.8 | V | - |
| Supply current | IDD | - | - | 50 | mA | VDD=2.8V,Ta=25°C |
| Input voltage | VIH | 0.8VDD | - | VDD | V | - |
| VIL | 0 | - | 0.2VDD | V | ||
| Input leakage current | IIL | -1.0 | - | 1.0 | mA | VIN=VDD or VSS |
Note: Voltage greater than above may damage the module.
All voltages are specified relative to VSS=0V.
2) Driving Backlight
| Item | Symbol | Min | Typ | Max | Unit | Remark |
| Forward Current | IF | -- | 80 | 88 | mA | |
| Forward Voltage | VF | - | 3.2 | - | V | |
| Connection mode | -- | 4Parallel | -- | |||
| LED number | / | 4 | pcs |
Note1: Optical performance should be evaluated at Ta=25℃ only .If LED is driven by high current, high ambient temperature & humidity condition. The life time of LED will be reduced. Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
ST7701S Round LCD Display Module
Inquiry Cart
0