Water - Based Paint Epoxy Water Coatings For Engineering Machinery Decoration And Anti - Corrosion

Water-based Paint Epoxy Water Coatings for Engineering Machinery Decoration and Anti-corrosion

◎Introduction

Water-based paint is a paint that uses water as a diluent and does not contain organic solvents. It is non-toxic, non-irritating, harmless to the human body, and does not pollute the environment. The paint film is plump, crystal clear, flexible, and resistant to water, abrasion, and aging , anti-yellowing, fast drying, easy to use and so on.

AE-7222 is widely used in the surface coating of metal substrates of elector-mechanical equipment (Like: Air conditioning refrigeration unit), special vehicles, engineering machinery and other products, plays a good role in decoration and anti-corrosion protection, and is suitable for high-pressure airless / mixed gas spraying and automatic line spraying.

◎Specifications:

◎Film Properties:

◎ Instructions

◎ Attention:

• The surface of the substrate must be clean and dry, and meet the requirements.
• Component A & B should be mix according to the weight ratio of 12:1. Dilute with 0-3% deionized water, use it after curing for 15min, and use it up within the pot-life which is 2h under 25℃. The higher the temperature, the shorter the pot-life.
• The tools used during construction must be dry and clean.
• Clean tools and equipment with water immediately after construction.
• It is strictly prohibited to contact with acid, alkali, oily paint and organic solvent during paint preparation and coating.
• No more than 400μm films can be formed at one time, otherwise sagging will occur.
• During construction, drying or curing, the relative humidity should be lower than 80% and the temperature higher than 5 ℃, otherwise the paint film cannot be completely cured.
• Do not press or rub heavily to avoid damage to the paint film or contact with organic solvents and water before the paint film is completely dried.
• Keep the construction site well ventilated and wear necessary protective equipment.

◎Company Profile:

Kinte Materials Science and Technology Co., Ltd. is subordinate to China Machinery Industry Corporation (a key state-owned enterprise directly managed by SASAC, ranking 284 among the world's top 500 in 2021). It is a national high-tech enterprise under China National Electric Apparatus Research Institute Co., Ltd. (Stock Code: 688128), a listed enterprise on the SSE STAR MARKET. Focusing on the R & D, production, and sales of environmentally friendly coatings (powder coatings, waterborne industrial coatings) and powder coating resins, the company is committed to improving the global market competitiveness of China's environmentally friendly coating industry. Now it has become the leader and promoter in China’s technological development of environmentally friendly coatings as well as polyester resins for powder coatings!

We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification and QUALICOAT Certificate. Due to the excellent and stable quality, our products always enjoy high reputation at home and oversea, and were sold to more than 30 countries. Our clients include many top air conditioning manufacturers in the world such as GREE, Midea, TICA, TRANE, etc.

We unremittingly stick at the business principle of “Quality is the life, adhere to first-class technology, first-class quality, first-class cost and first-class brand”. We would like to provide a complete set of services and solutions for both domestic and abroad customers and would like to go forward to brilliant future with you together.

Kinte Material Technology Co.,Ltd, affiliated to China National Electric Apparatus Research Institute

(CEI, established in 1958 ), is a state-owned company specializing in R&D, production and sales of

powder coatings, saturated polyester resins, liquid paints and special chemical materials which located

in Huadu District in Kinte Industrial Park with an area of 220,000 m² occupied.

We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification and QUALICOAT Certificate.

Due to the excellent and stable quality, our products always enjoy high reputation at home and oversea, and

were sold to more than 30 countries.

Polyester resin branch was founded in 2000, now there are two factories (DongGuan factory and TaiXing Factory)

with annual production capacity over 80,000 tons. Our clients include many top-tier powder manufacturers in the world

such as AKZO, PPG, TIGER, PROTECH, NIPPON, OXYPLAST, JOTUN, SHERWIN, VALSPAR, SINTERPLAST etc.

Powder coating branch was founded in 1992, and now there are two factories (HuaDu factory and WuHan factory)

with annual production capacity over 25,000 tons. And we have cooperated with many famous clients such as Gree,

Pansonic, HITACHI, IKEA, Mitsubishi, Walmart, HUAWEI, EMERSON, Hisence, Dicastal, BYD, AAG etc.

The company adhere to the quality concept “Quality is the life, providing comprehensively one-stop solution with

technical support and service, which access to customer’s respect and the market reputation. We are within top 3

powder coatings maunfacturers in China. Kinte powder coating was named "Famous brand of Guangdong province"

in 2012.

Kinte Industrial Park covers an area of 75000 square meters: 16600 square meters of administrative office area,

43400 square meters of factory buildings, 15000 square meters of living supporting facilities such as canteens and

dormitories; Production equipment, office furniture, roads, electricity supply, water supply, drainage, sewage, waste

water treatment, ventilation, communication, broadband network, cable TV and other supporting facilities are perfect.

Aerial View of Kinte Industrial Park, Huadu, Guangzhou

We unremittingly stick at the business principle of “Quality is the life, adhere to first-class technology, first-class

quality, first-class cost and first-class brand”. We would like to provide a complete set of services and solutions for

both domestic and abroad customers and would like to go forward to brilliant future with you together.