Thermosetting Anti - Corrosion Powder Coating Epoxy polyester Resin Powder Coating For Pipeline Oil Drill Pipes

Thermosetting Anti-corrosion Powder Coating, Epoxy Resin Powder Coating for Pipeline, Oil Drill Pipes

◎Introduction

KT-621HH is a thermosetting epoxy powder coating, which is a special anti-corrosion powder coating specially designed for pipeline corrosion used in high-temperature environments. The product has excellent corrosion resistance and high-temperature resistance and is suitable for anti-corrosion of the inner wall of oil drill pipes, tubing, and casing, as well as pipelines under harsh corrosive conditions.

This product meets the technical requirements of the standard SY/T0544-2016 "Technical Conditions for Internal Coating of Oil Drill Pipes" and SY/T6717-2016 "Technical Conditions for Internal Coating of Tubing and Casing"

◎Product Features

Excellent corrosion resistance

Excellent high-temperature resistance

Specially designed for pipeline corrosion used in high-temperature environments.

Suitable for anti-corrosion of the inner wall of oil drill pipes, tubing, and casing, as well as pipelines under harsh corrosive conditions.

◎Powder Properties

◎Film Properties

Note:

1. All data in sheet 1 and sheet 2 are based on laboratory tests and practical experience.

2. It is recommended that the product should pass the process evaluation before batch use to avoid unnecessary losses to customers due to various reasons such as process.

◎Pipe Film Operation Process

1) Remove oil, rust and other loose deposits, moisture, etc. on the surface.

2) Sand blasting or shot blasting to Sa2.5 level, anchor pattern depth 60 ⁓100μm, dust removal on the surface to near white level, pay attention to adding new and old sand evenly to make the ratio stable.

3) Thoroughly clean the surface of the pipe.

4) Special primer is required for spraying, and the spraying thickness should be below 25μm. Note that the thickness of the primer should not overwhelm the depth of the anchor pattern.

5) Preheating, put the pipes sprayed with primer into the heating furnace for preheating, generally controlled at 175 ⁓190℃.

6) Coat the powder coating on the inner surface of the pipe with a thickness of more than 200μm.

7) Put the coated pipe into the heating furnace and cure at 200±10℃ for 80±5min to make the coating reach the best state.

8) Test the coating performance after the coating is naturally cooled.

◎Storage

1. The product should be stored in a cool, ventilated, dry room with a temperature below 25°C and a humidity below 60%.

2. Keep away from fire and heat insulation.

3. The package can be opened at any time, and it should be sealed in time after use to prevent the powder from being polluted and damp.

4. Minimize the number of movements and avoid impact and pressure.

5. The stable storage period is 12 months.

Note: Improper storage conditions can easily cause the epoxy powder product to deteriorate, agglomerate and become unusable.

◎Package and Transportation

This product is a non-hazardous item. Packed in carton, 25kg per carton, the carton is lined with polyethylene plastic bag. During the shipping process, it should be lightly loaded, lightly unloaded and protected from direct sunlight, heat and moisture.

◎Product Show

Kinte Material Technology Co.,Ltd, affiliated to China National Electric Apparatus Research Institute

(CEI, established in 1958 ), is a state-owned company specializing in R&D, production and sales of

powder coatings, saturated polyester resins, liquid paints and special chemical materials which located

in Huadu District in Kinte Industrial Park with an area of 220,000 m² occupied.

We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification and QUALICOAT Certificate.

Due to the excellent and stable quality, our products always enjoy high reputation at home and oversea, and

were sold to more than 30 countries.

Polyester resin branch was founded in 2000, now there are two factories (DongGuan factory and TaiXing Factory)

with annual production capacity over 80,000 tons. Our clients include many top-tier powder manufacturers in the world

such as AKZO, PPG, TIGER, PROTECH, NIPPON, OXYPLAST, JOTUN, SHERWIN, VALSPAR, SINTERPLAST etc.

Powder coating branch was founded in 1992, and now there are two factories (HuaDu factory and WuHan factory)

with annual production capacity over 25,000 tons. And we have cooperated with many famous clients such as Gree,

Pansonic, HITACHI, IKEA, Mitsubishi, Walmart, HUAWEI, EMERSON, Hisence, Dicastal, BYD, AAG etc.

The company adhere to the quality concept “Quality is the life, providing comprehensively one-stop solution with

technical support and service, which access to customer’s respect and the market reputation. We are within top 3

powder coatings maunfacturers in China. Kinte powder coating was named "Famous brand of Guangdong province"

in 2012.

Kinte Industrial Park covers an area of 75000 square meters: 16600 square meters of administrative office area,

43400 square meters of factory buildings, 15000 square meters of living supporting facilities such as canteens and

dormitories; Production equipment, office furniture, roads, electricity supply, water supply, drainage, sewage, waste

water treatment, ventilation, communication, broadband network, cable TV and other supporting facilities are perfect.

Aerial View of Kinte Industrial Park, Huadu, Guangzhou

We unremittingly stick at the business principle of “Quality is the life, adhere to first-class technology, first-class

quality, first-class cost and first-class brand”. We would like to provide a complete set of services and solutions for

both domestic and abroad customers and would like to go forward to brilliant future with you together.