Vibration Alarm 4G GPS Tracker Remote Audio Monitoring

Vibration Alarm 4G GPS Tracker Remote Audio Monitoring

Main Feature: (4G GPS Tracker)

* 4G LTE Cat-1/Cat-M Communication Mode

* ZKM AT6558 GPS Location IC

* GPS+BDS+GLONASS Simultaneous Signal Reception

* Built-in 100mAh/3.7V Battery, Support Working 1-2 Hours

* Support Geo-Fence Alarm

* Support SOS Alarm

* Support Over Speed Alarm

* Support Low Battery Alarm

* Support Movement Detection

* Support ACC Detection

* Support Kilometer Report

* Support Oil Cut Off

* Support Vibration Alarm

* Support OTA Update

* Voltage: 9-100VDC, Suitable for All Types Of Vehicles

* IP65 Rain Proof

Functions: (4G GPS Tracker)

Remote Audio Monitoring , Remote Power/Fuel OFF , SOS Alarm , ACC Engion Detection , Power OFF Alarm , Overspeed Alarm , Vibration Alarm , Move Alarm , ACC Illegal Engion Alarm , etc.

Specification: (4G GPS Tracker)

Percautions:

The terminal is suitable for GSM standard MICRO SIM card , does not apply to CDMA card.

Please cut off the power before installing or uninstalling the SIM card.

1. The SIM card should support GPRS and the GPRS should be opened.

2. Inquiry by call needs the SIM card supporting the calling line identification presentation.

3. If you enable the PIN code of the SIM card, please use your mobile phone to disable the PIN code.

4. Please make sure that the SIM card has sufficient balance.

Terminal Wring Dgram:

Relay wiring diagram shows how to wire the relay to control the fuel pump:

Connect the 85 terminal(with small white cable) to the positive pole of the vehicle power (+12V/+24V), connect the 86 terminal(with small yellow cable) to the yellow cable of the terminal.

Cut off the positive pole of the fuel pump, next connect the positive pole to the 87a terminal(with thick green cable) of the relay, and connect another pole to 30 terminal(with thick green cable), showing as in the figure.

Notice: Be sure that the voltage of the vehicle power should match up to the working voltage of the relay, or the relay will be damaged.

We, Shenzhen iStarVideo Technology Co.,LTD founded in 2014, Located in Shenzhen, is a High-tech IoT company focusing on cloud-based video telematics. Being with more than 80 engineers, We have been keeping the development of the newest cloud vehicle camera solution to cater for the market needs. Our factory has 6 production lines with more than 130 workers, and the monthly production volume of vehicle camera is sixty thousand pieces.

4G Dash Camera, 4G GPS Tracker, Rear View Mirror, and other Vehicle Tracking System are our main products with the advantage of platform integration, Software and Hardware customization. We have been helping end user to reduce the accident rate with the installation of DMS and ADAS Camera and helping insurance company to supply the video evidence.

Our products are being sold to more than 20 Countries in the world and mostly applied for Cars, Trucks, Containers and different kinds of transportation vehicles as well as insurance field.

In the coming future, We will continuously launch 4G and 2K, 4G and 4K and the newest dash camera solution, we always think what our customer needs and what market trends. We have been giving very fast delivery, we expect more and more partners to join with Us!