Hidden OBD GPS Tracker Real Time Voice Recording GSM GPRS For Car

Small Easy Hidden Real-time Tracking Voice Recording OBD2 Global Locator GSM GPRS GPS Tracking Device

Main Feature: (OBD GPS Tracker)

* OBD standard interface.
* Build in 180mAh / 3.7V battery.
* Real time vehicle tracking.
* Work with any 16 - pin OBD interface cars.
* Can locate and get the position of your vehicle remotely via GPRS.
* Support function of map location inquiry.
* No installation, no wiring harness, simply plugs into OBD port.

* Working model:support GPRS & SMS model

* Shock Alarm

* Low battery Alarm

* Over speed Alarm

* Voltage: 9-35V DC

Functions: (OBD GPS Tracker)

Remote Audio Monitoring , Remote Power/Fuel OFF , SOS Alarm , ACC Engion Detection , Power OFF Alarm , Overspeed Alarm , Vibration Alarm , Move Alarm , ACC Illegal Engion Alarm , etc.

Specification: (OBD GPS Tracker)

Install the Terminal:

Suggest to install the terminal concealed by the dealer designated professional body.

Please make sure to install the terminal with this side towards the ground.

Notice

# Keep the terminal away from RF emission sources such as backing radar,car burglar alarm and other vehicle mounted communication devices.

# Suggest to use wide strong double-sided adhesive sponge to fix it, or use cable ties and other liable methods to fix it.

# Make sure the face upward as the terminal has internal GPS and GSM antenna and without metal blocks. Suggest to install the terminal in the following places:

1) The hiding place below the front windshield trim panel

2) The hiding place around the front dash

3) The place under the rear windshield

Notice: The GSM and GPS signal may be weakened if there is metal thermal insulation layer or heating layer on the front windshield, the terminal may work abnormally, so please change the place to install the terminal.

Terminal Wring Dgram:

Relay wiring diagram shows how to wire the relay to control the fuel pump:

Connect the 85 terminal(with small white cable) to the positive pole of the vehicle power (+12V/+24V), connect the 86 terminal(with small yellow cable) to the yellow cable of the terminal.

Cut off the positive pole of the fuel pump, next connect the positive pole to the 87a terminal(with thick green cable) of the relay, and connect another pole to 30 terminal(with thick green cable), showing as in the figure.

Notice: Be sure that the voltage of the vehicle power should match up to the working voltage of the relay, or the relay will be damaged.

We, Shenzhen iStarVideo Technology Co.,LTD founded in 2014, Located in Shenzhen, is a High-tech IoT company focusing on cloud-based video telematics. Being with more than 80 engineers, We have been keeping the development of the newest cloud vehicle camera solution to cater for the market needs. Our factory has 6 production lines with more than 130 workers, and the monthly production volume of vehicle camera is sixty thousand pieces.

4G Dash Camera, 4G GPS Tracker, Rear View Mirror, and other Vehicle Tracking System are our main products with the advantage of platform integration, Software and Hardware customization. We have been helping end user to reduce the accident rate with the installation of DMS and ADAS Camera and helping insurance company to supply the video evidence.

Our products are being sold to more than 20 Countries in the world and mostly applied for Cars, Trucks, Containers and different kinds of transportation vehicles as well as insurance field.

In the coming future, We will continuously launch 4G and 2K, 4G and 4K and the newest dash camera solution, we always think what our customer needs and what market trends. We have been giving very fast delivery, we expect more and more partners to join with Us!