Vacuum Coating Titanium Gr1 Sputtering Tube Targets 133OD*125ID*840L

Titanium Tube Target Titanium Gr1 ASTM B861-06 a 133OD*125ID*840L Vacuum Coating Target Sputtering

Materials technology development trend of the target material is closely related with the thin film technology development trend of the downstream application industry, along with the application of industry technical improvement on film products or components, the technology of target should be changed also, greatly to replace the original flat-panel display (FPD) in recent years, which is mainly composed of the cathode ray tube (CRT) computer monitors and television market. It will also greatly increase the technology and market demand of ITO target material. In addition to storage technology. The demand for high-density, large-capacity hard disks and high-density erasable discs continues to increase. All of these result in the change of the application industry's demand for target materials. Below we will introduce the main application fields of target materials and the development trend of target materials in these fields respectively.
Among all the application industries, the semiconductor industry has the most stringent quality requirements for target sputtering films. Today, 12-inch (300 epistaxis) silicon chips have been made. The interconnects are shrinking in width. Wafer manufacturers require large size, high purity, low segregation and fine grain, which requires better microstructure of the manufactured target. The crystal particle diameter and uniformity of target material have been considered as the key factors affecting the deposition rate of thin films. In addition, the purity of the film is greatly related to the purity of the target material. In the past, the purity of 99.995% (4N5) copper target may be able to meet the requirements of 0.35pm process of semiconductor manufacturers, but it can not meet the requirements of 0.25um process, and the 0.18um and even 0.13 m process. The purity of the target material required will be above 5 or even 6 N. Compared with aluminium, copper has higher resistance to electrical migration and lower resistivity, can meet! The conductor process is required for submicron wiring below 0.25um, but brings with it other problems: low adhesion strength of copper to organic dielectric materials. In addition, it is easy to react, which leads to corrosion and disconnection of the copper interconnect in the process of use. To solve these problems, a barrier layer needs to be placed between the copper and the dielectric layer. The barrier material generally uses metals and compounds with high melting point and high resistivity, so the barrier layer thickness is required to be less than 50 nm, and the adhesion performance with copper and dielectric materials is good. The barrier materials for copper interconnects and aluminium interconnects are different. New target materials need to be developed. The target material for the copper interconnect barrier layer includes Ta, W, TaSi, WSi, etc. But Ta and W are refractory metals. It is relatively difficult to make, and molybdenum, chromium and other gold is being studied as an alternative material.

Features

1. Low density and high strength
2. Customized according to the drawings required by customers
3. Strong corrosion resistance
4. Strong heat resistance
5. Low temperature resistance
6. Heat resistance

Company information

Feiteng Metal Material Co., Ltd. was founded in 2008, is a collection of production, processing, sales, research and development as one of the high-tech comprehensive enterprise. After more than ten years of efforts, our company's production technology development has been very mature. The company has been approved as a national high-tech enterprise by torch Center of Ministry of Science and Technology of China. At the same time, it has been rated as civilized and honest unit in Shaanxi Province, advanced unit of Quality and credit keeping in Shaanxi Province, excellent unit in Shaanxi Province, and several honorary titles of top ten brand units in Shaanxi Province. Our company mainly deals in metal and non-metal materials, products, equipment recording, production and processing as well as import and export business. In the first half of this year, the company has obtained ISO 9002 quality system certification and military system certification.

The company's main products are titanium and titanium alloy forgings, deep processing parts, and a variety of metal rotating target, multi-arc target, plane target, and small equipment production. Mainly used in aviation, aerospace, shipping, chemical, medical, ocean and other fields. Especially in recent years, the state has advocated military-civilian integration, and private enterprises can participate in the R&D and production of military projects. The company responded positively, invested more than 800,000 yuan to purchase equipment, participated in research and development, production and achieved certain results. And many countries well-known enterprises and research and development department in our company have good relations of cooperation, such as Wuhan 722 made antenna, Wuhan university of science and technology recycling tank, Henan Tengfei underwater submersible, and Baoti titanium equipment company, northwest institute of titanium all multiple project cooperation, successfully applied to the practice, and obtained the customer recognition and praise.

Our company's biggest advantage is titanium back tube, titanium alloy seamless tube and titanium copper tube target production. Among them, titanium copper tube target has achieved the international leading level, titanium back tube and titanium alloy seamless tube also belong to the domestic leading level. Baoji Feiteng Metal Material Co., Ltd. has set up a foreign trade company to do import and export trade, responsible for import and export products consultation, communication and product requirements, import and export registration and other issues. The staff responsible for communication were all overseas students. Ensure the quality of export products and services. Our company has a special quality department to check the quality of products, to ensure that the quality of products to meet customer requirements. Quality, efficiency and service are the most concerned issues of our company. We will try our best to meet customer requirements and timely communicate with customers in case of any uncertain factors to ensure that the products produced are as perfect as possible.

The tenet of Baoji Feiteng Metal Material Co., Ltd. is to maintain integrity and quality while producing efficiently and quickly, and share the results with customers for mutual benefit. We have been actively trying our best to provide the most efficient and convenient service, with low price and high quality to win the market welcome. This is how we win the trust of our customers and our business model.

If there is an opportunity, we will show you the advantages of our company, let us create considerable profits together, support and grow together. Since you trust our company's quality and service, I believe we will not let you down, give us an opportunity to give you a surprise. We sincerely hope to establish long-term friendly cooperation and business relations with your company.