AZ91D Customized Magnesium Alloy Plate 5mm With Good Rigidity
Brand Name:DOME
Certification:ISO9001,CE,SGS
Model Number:DM004
Minimum Order Quantity:10Pcs
Delivery Time:3-25 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Site Member
Location:
Zhengzhou Henan China
Address:
No. 1394, hanghai East Road, Zhengzhou area (Jingkai), Henan pilot Free Trade Zone,China
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
AZ91D Easy To Use Customized Magnesium Alloy Plate With High Quality
Introduction of Magnesium Alloy Plate:
The AZ91D belongs to the cast magnesium alloy, mainly by the pressure mold casting into a manner, and can be changed by electrophoresis. It is characterized by a large strength, and corrosion resistance is greatly improved, which is mainly used for housing, small-size and shaped brackets of electrical products. A represents metal aluminum Al, Z represents metal zinc Zn, 9 represents aluminum content of 9%, 1 represents zinc content is 1%, and the last D is identifiable code. (National standard GB / T5153-2003)
Details of Magnesium Alloy Plate:
| Type | Mg | Al | Zn | Mn | Si | Fe | Cu |
| AX31B | residual | 2.5-3.5 | 0.60-1.4 | 0.20-1.0 | ≤0.08 | ≤0.003 | ≤0.001 |
| AZ61A | 5.8-7.2 | 0.40-1.5 | 0.15-0.50 | ≤0.10 | ≤0.005 | ≤0.005 | |
| AZ80A | 7.8-9.2 | 0.20-0.80 | 0.12-0.50 | ≤0.10 | ≤0.005 | ≤0.005 | |
| AZ91D | 8.5-9.5 | 0.45-0.90 | 0.17-0.40 | ≤0.08 | ≤0.004 | ≤0.001 |
Features of Magnesium Alloy Plate:
Magnesium alloy is the lightest metal, magnesium alloy strength,
and stiffness of the magnesium alloy, and the impact resistance is
better than aluminum alloy, which is widely used in automobiles,
communication electronics, etc. The automotive industry is the most
total amount of magnesium alloys, the best industries.
The magnesium alloy sheet is divided into sheets, medium plates,
and thick plates. High thickboard strength, good rigidity, mostly
used in aerospace military fields, while medium thin plates are
used for civilian industries.
Due to the good thermal conductivity of magnesium, the cutting
force is small, the heat dissipation speed during processing is
very fast, and thus the tool life is long, the adhesive knife is
small, so that the tool cost can be reduced, and the downtime
required to replace the tool is shortened.
Because of magnesium is easy to cut, its chip performance is very
good. Under normal circumstances, it can reach the desired final
surface finish.
AZ91D Customized Magnesium Alloy Plate 5mm With Good Rigidity
Inquiry Cart
0