Single Phase Three Phase Inverter for Submersible Pump with Remote Monitoring Function
Brand Name:VEIKONG
Certification:CE
Model Number:VFD500-PV
Minimum Order Quantity:1
Delivery Time:3 days, depend on the order quantity
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Supplier`s last login times:
within 20 hours
Product Details
Company Profile
Product Details
2.2kw 7.5kw Single Phase Three Phase Inverter For Submersible Pump
2.2kw 4kw 5.5kw 7.5kw Single Phase Three phase Inverter VFD For Submersible Pump
Key Features:
1, Support single phase/three phase 220V, and three phase 380V
solar water pump inverter, power from 0.75kW to 160KW
2, Simply connect the photovoltaic panel to the inverter, no need
to set any parameters.
3, It has protection functions such as overvoltage protection,
overcurrent protection, dry runing protection, full water
protection.
4, Advanced MPPT algorithm. Ensure solar power tracking efficiency
can reach 99.99%
5, Supports optional GPRS module, which can realize remote
monitoring function of computer webpage and mobile APP
6, Support PV DC input and grid AC input at same time, which can
meet 24 hours of no care work
7, Support LCD keypad, it is easier to monitor system situation.
Support optional LCD keypad
Support optional GPRS Module
Product application pictures
Trial run(How to start solar pump inverter)
Make sure all cables connections of solar panel and pump motor
correct and no
need to set any parameter, if you want to set parameter, you can do
as follows.
Step 1: (Keypad control):Set motor parameter P11.02- P11.06 as per motor pump name
plate If dry run protection is required, measure the unload
protection current(see details in
user manual chapter for dry run function) If dry run protection not
required then miss this step
and go to step 2.
Step 2: Set other related special solar pump parameters for optimization
if needed.
Step 3: After trial run finishing, if motor pump still not output water
when inverter is running
more than 40 Hz. Please disconnect the power supply and replace any
two-phase wiring of
the motor
FAQ
1. How to achieve Automatic start after stop?
If it is controlled by keyboard, so there is no need to set any
parameter(P47.03 waiting time)If you want to
control by external switch. First set P00.06=1 and use a wire or
switch to connect com and DI1,When the
switch is closed, the drive run, when the switch is open, the drive
stop
2. How to check and solve basic problem of inverter trips and error
a:Check the total vmp and voc of solar panels ,solar panel
technical data
b:Check motor pump power and rated current
c: Check the distance between motor and inverter
d: Check trip record r25.00 r25.01 25.02 25.03 r26.00 r26.01 r26.02
r26.03 r26.08 r26.09 r26.10 r26.11
e: Check troubleshooting fault and find relevant solutions
f : Check if motor insulation has been damaged or motor is blocked
| Brand | VEIKONG |
| Model | VFD500-PV |
| MPPT | 99.9999% |
Single Phase Three Phase Inverter for Submersible Pump with Remote Monitoring Function
Inquiry Cart
0