Sensorless VFD Variable Frequency Inverter 90kw 110kw Vector Control
Brand Name:VEIKONG
Certification:CE
Model Number:VFD500-PV
Minimum Order Quantity:1
Delivery Time:3 days, depend on the order quantity
Payment Terms:L/C, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Supplier`s last login times:
within 20 hours
Product Details
Company Profile
Product Details
VFD variable frequency inverter For Heavy Load 55kw 75kw 90kw 110kw
VEIKONG hot selling VFD
VFD500M is high performance vector control mini vfd
VFD500 is high performacne general vfd
VFD550 is high perfromance special vfd with positional control.
VFD530 is high performance special vfd with lifting function,
support 2 PID, support Synchronous and asynchronous motors
VFD500-PV is solar pump inverter.
VFD510 is IP65 inverter
Techincal Parameters:
| Item | Specifiation | |
| Input | Inuput Voltage | 1phase/3phase 220V:200V～240V 3 phase 380V-480V:380V～480V |
| Allowed Voltage fluctuation range | -15%～10% | |
| Input frequency | 50Hz / 60Hz,fluctuation less than 5% | |
| Output | Output Voltage | 3phase:0～input voltage |
| Overload capacity | General purpose application:60S for 150% of the rated current Light load application:60S for 120% of the rated current | |
| Control | Control mode | V/f control Sensorless flux vector control without PG card(SVC) Sensor speed flux vector control with PG card (VC) |
| Operating mode | Speed control,Torque control(SVC and VC) | |
| Speed range | 1:100 (V/f) 1:200( SVC) 1:1000 (VC) | |
| Speed control accuracy | ±0.5% (V/f) ±0.2% (SVC) ±0.02% (VC) | |
| Speed response | 5Hz(V/f) 20Hz(SVC) 50Hz(VC) | |
| frequency range | 0.00～600.00Hz(V/f) 0.00～200.00Hz(SVC) 0.00～400.00Hz(VC) | |
| Input frequency resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.1% | |
| Startup torque | 150%/0.5Hz(V/f) 180%/0.25Hz(SVC) 200%/0Hz(VC) | |
| Torque control accuracy | SVC:within 5Hz10%,above 5Hz5% VC:3.0% | |
| V/f curve | V / f curve type: straight line, multipoint, power function, V / f separation; Torque boost support: Automatic torque boost (factory setting), manual torque boost | |
| Frequency giving ramp | Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s | |
| DC bus voltage control | Overvoltage stall control: limit the power generation of the motor by adjusting the output frequency to avoid skipping the voltage fault; Undervoltage stall control: control the power consumption of the motor by adjusting the output frequency to avoid yaw failure VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump undervoltage fault | |
| Carrier frequency | 1kHz～12kHz(Varies depending on the type) | |
| Startup method | Direct start (can be superimposed DC brake); speed tracking start | |
| Stop method | Deceleration stop (can be superimposed DC braking); free to stop | |
| Maincontrol function | Jog control, droop control, up to 16-speed operation, dangerous speed avoidance, swing frequency operation, acceleration and deceleration time switching, VF separation, over excitation braking, process PID control, sleep and wake-up function, built-in simple PLC logic, virtual Input and output terminals, built-in delay unit, built-in comparison unit and logic unit, parameter backup and recovery, perfect fault record,fault reset, two groups of motor parameters free switching, software swap output wiring, terminals UP / DOWN | |
| Classification | Parameter group | Page |
| Common parameters | 00:Basic function | Page 37 |
| 01:Frequency source selection | Page 39 | |
| 02:Start and stop | Page 45 | |
| 03:Ramp and S curve | Page 49 | |
| 04: Analog and pulse input | Page 51 | |
| 05:Analog and pulse output | Page 55 | |
| 06:Multi-function Digital input (DI) | Page 56 | |
| 07: Multi-function Digital output(DO) | Page 59 | |
| 08:Digital Output setting | Page 62 | |
| Motor control | 10:Encoder type | Page 65 |
| 11:Motor1 parmeter | Page 66 | |
| 12:Motor1 VFcontrol parameter | Page 68 | |
| 13:Motor1 Vector controlparameter | Page 71 | |
| 14:Torque control | Page 73 | |
| 16:Energy saving control | Page 74 | |
| Display and protection | 20:User-defined parameters | Page 75 |
| 21:Keypad and display | Page 77 | |
| 22:AC Drive configuration | Page 79 | |
| 23:Drive protection function setting | Page 81 | |
| 24:Motor protection parameter | Page 85 | |
| 25:Fault tracking parameter | Page 87 | |
| 26:Fault recording parameter | Page 87 | |
| 27:Monitoring parameter | Page 90 | |
| Communication | 30:Modbus communication | Page 90 |
| 31:Canopen communication | Page 92 | |
| Application | 40:Process PID Function | Page 92 |
| 41:Sleep function | Page 98 | |
| 42:Simple PLC | Page 100 | |
| 43:Programmable delay unit | Page 102 | |
| 44:Comparator and logic unit/controller | Page 104 | |
| 45:Multifunction counter | Page 108 | |
| Motor 2 | 60:Motor2 basic parameter | Page 110 |
| 61:Motor2 parameter | Page 111 | |
| 62:Motor2 VF control parameter | Page 111 | |
| 63:Motor2 vector control parameter | Page 111 |
VEIKONG VFD replace famous brand VFD
Sensorless VFD Variable Frequency Inverter 90kw 110kw Vector Control
Inquiry Cart
0