90A 45kw 60hp Vfd Fan Controller / Air Compressor VFD For Single Phase Motor
Brand Name:VEIKONG
Certification:CE, ROHS
Model Number:VFD500-045G/055GT4B
Minimum Order Quantity:1
Delivery Time:depends on quantities
Payment Terms:T/T, Western Union, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Supplier`s last login times:
within 20 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
45kw 60hp ac drive inverter vfd for pump fan air compressor vfd
1, With inside EMC C3 filter and building-block design for IO
extension card and different kinds of PG card
2, Top performance in our industry which represent in torque in
less than 1hz 0.5hz 0.25hz 0.1hz and 0hz
it can compare with any domestic chinese brand for output torque.
3, Smooth running and stability, support optional LCD keypad and dual display keypad. support PC tools.
4, Support modbus485, canopen, profinet communciation.
5, Low noise on motor and fast response for 0.1S acceleration and
deceleration without dead zone
6, Reverse and forward free switching
7, Sleeping function and energy saving function as well as in built
PLC programming
8, Tension control and torque mode control
9, Support two group motor parameters which can realize two motor
switching control
| Item | Specifiation | |
| Input | Inuput Voltage | 1phase/3phase 220V:200V～240V 3 phase 380V-480V:380V～480V |
| Allowed Voltage fluctuation range | -15%～10% | |
| Input frequency | 50Hz / 60Hz,fluctuation less than 5% | |
| Output | Output Voltage | 3phase:0～input voltage |
| Overload capacity | General purpose application:60S for 150% of the rated current Light load application:60S for 120% of the rated current | |
| Control | Control mode | V/f control Sensorless flux vector control without PG card(SVC) Sensor speed flux vector control with PG card (VC) |
| Operating mode | Speed control,Torque control(SVC and VC) | |
| Speed range | 1:100 (V/f) 1:200( SVC) 1:1000 (VC) | |
| Speed control accuracy | ±0.5% (V/f) ±0.2% (SVC) ±0.02% (VC) | |
| Speed response | 5Hz(V/f) 20Hz(SVC) 50Hz(VC) | |
| frequency range | 0.00～600.00Hz(V/f) 0.00～200.00Hz(SVC) 0.00～400.00Hz(VC) | |
| Input frequency resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.1% | |
| Startup torque | 150%/0.5Hz(V/f) 180%/0.25Hz(SVC) 200%/0Hz(VC) | |
| Torque control accuracy | SVC:within 5Hz10%,above 5Hz5% VC:3.0% | |
| V/f curve | V / f curve type: straight line, multipoint, power function, V / f separation; Torque boost support: Automatic torque boost (factory setting), manual torque boost | |
| Frequency giving ramp | Support linear and S curve acceleration and deceleration; 4 groups of acceleration and deceleration time, setting range 0.00s ~ 60000s | |
| DC bus voltage control | Overvoltage stall control: limit the power generation of the motor by adjusting the output frequency to avoid skipping the voltage fault; Undervoltage stall control: control the power consumption of the motor by adjusting the output frequency to avoid yaw failure VdcMax Control: Limit the amount of power generated by the motor by adjusting the output frequency to avoid over-voltage trip; VdcMin control: Control the power consumption of the motor by adjusting the output frequency, to avoid jump undervoltage fault | |
| Carrier frequency | 1kHz～12kHz(Varies depending on the type) | |
| Startup method | Direct start (can be superimposed DC brake); speed tracking start | |
VEIKONG inverter work together with famous brands
Modbus and Canopen communication parameter
| 30 Group Modbus communication parameter | ||||
| P30.00 | Communication type | 0:Modbus; 1:Canopen | 0 | ★ |
| P30.01 | Drive Address | 1～247 Different slaves on the same network should set different local addresses; 0 is the broadcast address, all slave inverters can be identified | 1 | ★ |
| P30.02 | Modbus baud rate | 0:1200 bps; 1:2400 bps 2:4800 bps; 3:9600 bps 4:19200 bps; 5:38400 bps 6:57600 bps; 7:115200 bps | 3 | ★ |
| P30.03 | Modbus data format | 0: 1-8-N-1 (1 start bit +8 data bits +1 stop bits ) 1: 1-8-E-1 (1start bit +8 data bits +1 even parity +1 stop bit) 2: 1-8-0-1 (1 star bit+8 data bits +1odd parity+1 stop bits) 3: 1-8-N-2 (1 star bit+8 data bits+2 stop bits) 4: 1-8-E-2 (1 star bits+8 data bit+1 even parity+2 stop bits) 5: 1-8-0-2 (1 start bit +8 data bits+1 odd parity+2 stop bits) | 0 | ★ |
| P30.04 | Modbus response delay | 1～20msThe delay time of the local to answer the master | 2ms | ★ |
| P30.05 | Modbus overtime | 0.0s(disabled)～60.0s(works for master-slave system) When this function code effective,if slave do not receive data from master overtime,it will trip as Er.485 | 0.0s | ★ |
| r30.06 | Number of frames received by Modbus | Each time a frame is received, this value is incremented by 1,0 to 65535 cycles. | - | ● |
| r30.07 | Number of frames that Modbus has sent | Each time a frame is sent, this value is incremented by 1,0 to 65,536 cycles. | - | ● |
| r30.08 | Number of error frames received by Modbus | Each time an CRC error frame is received, this value is incremented by 1,0 to 65535 cycles; it can be used to judge the degree of communication interference. | - | ● |
| P30.09 | Modbus master-slave option | 0: Slave 1: Master(sent by broadcast ) | 0 | ★ |
| P30.10 | Slave memory when inverter as master | 1～9 corresponds to 0x7001～0x7009 | 1 | ☆ |
| P30.11 | Data sent by Master | 0:output frequency 1:set frequency 2:output torque 3:set torque 4:PID setting 5:PID feedback 6:output current | 0 | ☆ |
| P30.12 | Sending interval of Master | 0.010～10.000sAs a master, after sending one frame of data, the next frame of data is sent after this delay. | 0.1s | ☆ |
| P30.13 | Receiving proportaionality factor of slave | -10.000～10.000The values of slave registers 0x7001 and 0x7002 take effect after passing through this scaling factor | 1.00 | ☆ |
| P30.14 | Communication special register speed unit | 0: 0.01% 1: 0.01Hz 2: 1Rpm Some units of specific communication registers can be set by this parameter. See Appendix A for details. | 0 | ☆ |
| P30.15 | Modbus response characteristics | When the format of the received frame is a write register, this parameter can be set to reply to the host. 0: Reply to the host (standard Modbus protocol) 1: Do not reply to the host (non-standard Modbus protocol) | 0 | ☆ |
| 31 Group Canopen communication parameter | ||||
| P31.00 | CANopen communication address | 1 ~ 127 | 1 | ☆ |
| P31.01 | CANopen Baud rate | 0:100k 1:125k 2:250k 3:500k 4:1M | 3 | ☆ |
| P31.02 | CANopen overtime | 1ms ~ 20ms | 4ms | ☆ |
| r31.07 | CANopen version number | Display the version number of the CANopen card | - | ● |
| r31.08 | CANopen Working status | 0: Initialisation status 1: Disconnected 2: Connecting/Preparing- 3: Stopped 4: Operational status 5: Pre_operational | - | ● |
| r31.10 | CANopen receive error count | The number of error frames received by CANopen is not saved after power off | - | ● |
| r31.11 | CANopen send error count | The number of frames sent by CANopen is not saved after power off | - | ● |
| r31.12 | CANopen receive frame number | The number of frames received by CANopen is not saved after power off | - | ● |
| r31.14 | CANopen send frame number | The number of frames sent by CANopen is not saved after power off | - | ● |
90A 45kw 60hp Vfd Fan Controller / Air Compressor VFD For Single Phase Motor
Inquiry Cart
0