Cnc Spindle VFD Inverter 5.5 Kw 7.5 Kw VFD Unit With LCD Display
Brand Name:VEIKONG
Certification:CE, ROHS
Model Number:VFD500
Minimum Order Quantity:1
Delivery Time:depends on quantities
Payment Terms:T/T, Western Union, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
4F, Building 5, Dongluyang Industrial ,Park, No. 4, Tengfeng 4th Road, Fuyong Phoenix Third, Industrial Zone, Baoan District, Shenzhen China
Supplier`s last login times:
within 20 hours
Product Details
Company Profile
Product Details
Inverter with LCD display 220v 380v 4kw 5.5kw 7.5kw for CNC
application
VFD500 features and technical data sheet:
| Item | Specifiation | |
| Input | Inuput Voltage | 1phase/3phase 220V:200V～240V |
| Allowed Voltage fluctuation range | -15%～10% | |
| Input frequency | 50Hz / 60Hz,fluctuation less than 5% | |
| Output | Output Voltage | 3phase:0～input voltage |
| Overload capacity | General purpose application:60S for 150% of the rated current | |
| Control | Control mode | V/f control |
| Operating mode | Speed control,Torque control(SVC and VC) | |
| Speed range | 1:100 (V/f) | |
| Speed control accuracy | ±0.5% (V/f) | |
| Speed response | 5Hz(V/f) | |
| frequency range | 0.00～600.00Hz(V/f) | |
| Input frequency resolution | Digital setting: 0.01 Hz | |
| Startup torque | 150%/0.5Hz(V/f) | |
| Torque control accuracy | SVC:within 5Hz10%,above 5Hz5% | |
| V/f curve | V / f curve type: straight line, multipoint, power function, V / f
separation; | |
| Frequency giving ramp | Support linear and S curve acceleration and deceleration; | |
| DC bus voltage control | Overvoltage stall control: limit the power generation of the motor
by adjusting the output frequency to avoid skipping the voltage
fault; | |
| Carrier frequency | 1kHz～12kHz(Varies depending on the type) | |
| Startup method | Direct start (can be superimposed DC brake); speed tracking start | |
| Stop method | Deceleration stop (can be superimposed DC braking); free to stop | |
| Maincontrol function | Jog control, droop control, up to 16-speed operation, dangerous speed avoidance, swing frequency operation, acceleration and deceleration time switching, VF separation, over excitation braking, process PID control, sleep and wake-up function, built-in simple PLC logic, virtual Input and output terminals, built-in delay unit, built-in comparison unit and logic unit, parameter backup and recovery, perfect fault record,fault reset, two groups of motor parametersfreeswitching, software swap output wiring, terminals UP / DOWN | |
| Function | Keypad | LED Digital keyboard and LCD keypad(option) |
| Communication | Standard: | |
| PG card | Incremental Encoder Interface Card (Differential Output and Open Collector), Rotary transformer Card | |
| Input terminal | Standard: | |
| Output terminal | standard: | |
| Protection | Refer to Chapter 6 "Troubleshooting and Countermeasures" for the protection function | |
| Environment | Installation location | Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt. |
| Altitude | 0-3000m.inverter will be derated if altitude higher than1000m and rated output current will reduce by 1% if altitude increase by 100m | |
| Ambient temperature | -10°C~ +40°C,maximum 50°C (derated if the ambient temperature is between 40°C and 50°C)Rated output current decrease by 1.5% if temperature increase by 1°C | |
| Humidity | Less than 95%RH, without condensing | |
| Vibration | Less than 5.9 m/s2 (0.6 g) | |
| Storage temperature | -20°C ~ +60°C | |
| Others | Installation | Wall-mounted, floor-controlled cabinet, transmural |
| Protection level | IP20 | |
| cooling method | Forced air cooling | |
| EMC | CE ROHS | Internal EMC filter |
Replace famous brands vfd in general application.
;
Veikong application picture:
Cnc Spindle VFD Inverter 5.5 Kw 7.5 Kw VFD Unit With LCD Display
Inquiry Cart
0